Search the Community

R33 rb25det engine fan I've recently bought a r33 rb25det, the car has a few minor problems but the biggest one is the engine fan has some cracks in it and i want to replace it. I've called all local shops within perth that deal with skylines or have parts and none of them have. Nissan is asking for 300 which is too much. Is there anyone living in perth who has a spare rb25det engine fan i could buy of them.

3.5" 90mm CAT BACK EXHAUST R33 GTR WTB REQUIRE 90MM EXHAUST FOR R33 GTR WILL LOOK AT FRONT PIPE ALSO MUST BE 3.5" FLANGE CONDITION IS NOT AN ISSUE

WTB SYDNEY - R33 Brake Shims front and rear Hi All, Just wanting to see if anyone is selling R33 GTST brake shims. The old owner of my car binned them and I would like to replace them. I know Kudos and Taarks have them new but I would be fine with a second hand set.

97 r33 w/ RB26 highmount 430hp looking at selling my 430hp rb26 r33 skyline, have had the car for around 4 years and since than i have just been using it as a daily and slowly trying to get more power out of it, it was on its way to making 500hp when i didnt realise the wastegate spring maxed out at 20 pound. engine has been well looked after with oil changes every 5k, unfortunatly im not really focused on looks so the front bar could do with abit of repair work. apart from that the exterior is tidy, interior is in great condition and still has the original mats, steering wheel ect, located in fraser Coast, QLD contact: 0438 016 754 Looking for 15,000 negotiable engine RB26 r32 engine rebuit with crank extension new n1 oil and water pump 6boost manifold garret 35r turbo 50mm pro gate wastgate 4in apexi exhaust with Vband downpipe splitfires coilpacks custom oil catch can setup brand new radiator hoses Aluminium radiator front mount intercooler brand new adaptronic modular ecu fuel pressure sensor for tunning brand new boost solenoid deleted all un-used vaccum lines and waterlines and got it tune with map pressure for a better idle. deleted standard oil warmer to reduce clutter relocated fuse box into center console Fuel Turbosmart 1200 FPR Id1000 injectors twin Bosch 044 3L surge tank setup race works billet fuel rail fuel pressure sensor custom braided lines in engine bay Suspension Tien coil overs adjustable rear lower control arms adjustable rear camber arms adjustable castor arms Exterior slim line boot wing roof wing series two lip extension standard weather shields ssr meshies

Hi guys, not sure if this is the right place to post this but having trouble finding information. Ive got a S1 r33 with Rb25DET NEO and has been running with microtech lt12s, had a modified s1 loom but didn't last long melted coilpacks and loom became unreliable. ive since picked up an adaptronic select plug and play ecu for R34GTT and soon to get a r34 engine loom. My question is what will need to be swapped over between the 34 ENGINE LOOM and the 33 BODY LOOM, and will they plug in into each other? Any info greatly appreciated. Cheers.

Just got r33 gtst allready have an oil leak. Need help/advice Hi everybody i come here with my hat in my hands needing some advice. A few days ago i purchased a r33 gtst from the owner of a performance shop in Sydney its got the following New engine with unknown k's pod, exhaust, screamer pipe stock intercooler stock ecu stock turbo @ 11psi told it dyno'd 190kw It went hard on a test drive but since picking it up its started idling rough and today after taking it for a long drive i noticed a puddle of oil underneath, popped the bonnet and seen its pissed half(according to the dipstick) its oil out through the oil line to the turbo? So i got back onto the bloke and he told me to top it up with 20/50 and bring it back around.... Now i fix computers for a living but 20/50 in a RB doesn't sound right. Any input/advice on what to do or who to take it to is really appreciated.

R33 rb25det I've recently bought a r33 rb25det, the car has a few minor problems but the biggest one is the engine fan has some cracks in it and i want to replace it. I've called all local shops within perth that deal with skylines or have parts and none of them have. nissan is asking for 300 which is too much. Is there anyone living in perth who has a spare rb25det engine fan i could buy of them.

Midnight Express 2.0 Hey guys, In a matter of months I will be flying up to Sydney to drive down my brothers 1998 Nissan Skyline R33 40th anniversary edition (you can see its build log here). Having been an already heavily modified vehicle it does leave very little in the way of further modifying but spending countless amounts of money on our cars seems to be a family trait I thought I should carry on. I have already started mapping out future modifications and upgrades and may eventually start chasing larger and larger figures and hope to take this car to another level.

R33 Rb25det pcv HELP PLEASE I'm about to do my own service on my first r33, because i don't know how well the previous owner took care of the car, Can anyone tell me how to locate the pcv filter on a factory stock rb25det engine or some method of removing and cleaning before i later on change the valve cover gasket. Thankyou

deciding between 200sx or R33 GTS-T or Integra Type R - for roll racing Hi, I drive a 2005 STI that costs about $26,000 which only delivers about 195kw at the wheels, to me i find that its expensive for what it delivers in roll racing. I am thinking to sell it and buy a cheaper car that will be just as fast in roll racing. I want to spend about $15,000 max on a car, I basically want the best bang for my buck that will be good in roll racing. There is so many cars to choose from and i dont know how they perform on the street which is faster in a straight line (not off the line) i can find out numbers on the internet but on the street its a different story when they are raced because weight, power and so many factors need to be considered. So i need advice from people who have street knowledge. The cars im looking for must have steering wheel airbag and they must be legal from factory and not major defects that need engineering certificate etc.. give and take.. cars i have in mind at the moment: - 2001 Honda integra DC2R basic mods costs about $13,000 someone said it beats 200sx and skylines (not sure if this is true) - Honda EP3 not sure how fast they are with basic mods cost about $15,000 - 200SX S14 or S15 not sure how fast they are with basic mods, cost around $15,000 - Skyline R33 GTS-T series 2 cost around $10,000 for a clean one, but i find that they are slow when stock and if i spend about 5k for mods which pushes it to about 230kw atw, BUT i dont know if it will be quicker than the other cars by the way im not going to race it at roll racing but you get the idea what i want the car for. Thanks heaps!

Catch Can to suit R33 or R34 GTR Custom made washer bottle and catch can to suit R33 and R34 GTR. Internally baffled, 2x -12 inlets, 1x -12 outlet, dedicated tap for easy draining, powder coated in wrinkle black. Issue is that the holes for the washer motors were not cleanly cut and do leak a little. These can be sealed quite easily though. $350 located in Sydney, can ship.