Jump to content
SAU Community

Recommended Posts

I recently got a new pair of tyres at 150 dollars a piece, which are meant to be pretty good quality for the money, and i havent looked back.

i drive a turbo 33, and the sensational grip just gives u the sheer joy of driving.

I struggled on some bald tyres for a few weeks, and new tyres give u confidence, handling, and obviously safety. i highly recommend it for those of you with not so good tyres B)

Now i can barrel thru those tight corners, get reasonable traction from the lights, and flooring it in second thru a turn will provide traction loss obviously, but extremely predictable, and easy to control out of the turn.

hehe, as u can guess ive had a great night out.

Man once u get a skyline u cant look back ey. its just the best :D

Go the mighty liner!!!!

siigning out..

Soon2b33

Edited by soon2b33
Link to comment
https://www.sau.com.au/forums/topic/100075-new-tyres-are-worth-it/
Share on other sites

Tyres are probably the most influencial part of the car in terms of cornering speed, handling, and other related aspects of driving. A powerful car with shit tyres will always get beaten by a less powerful car with far better tyres when it comes to circuit racing. That sed if its only for taking off at the lites...it doesnt make such a huge differnce as it does for cornering...

My 32 has 235 on the fronts....255 on the rears.... having coilovers i have already gone thru 1 set of rear tyres in under 10 thousand k's with the original fronts which i bought it with still on there...That sed...i currently have Kuhmo Ecsta's on the fronts....and Hankook K104's on the rear...and within the speed limit (of course) through the hills....The car noticeably understeers due to the intense grip of the rear wheels in comparison to the fronts (being worn aswell as smaller).

My two cents worth...

Haha i've got the opposite problem, coilovers + hankook K104 235s on the front and the famed falken ziex ze326 265's on the back, front grips incredibly well, back barely holds the road dry, wet = forget it, may as well be running slicks...

yer, im looking forward to getting some new rear tyres

my currents are totally had it and need to be replaced now (im saving for them, 265/35/18s arent cheap)

im looking forward to grip as im a bit nervous booting it through 1/2 gears currently, never no when its going to break into wheelspin

tyres for 150 each would be absolute shitters. The ones you had on it before would be even worse. Tempe have 17" nangkangs for 130, or falcon ziex for about 140.

Those would be the sorts of crap available for that price.

For actual decent tyres, try the falken grb451 or rt615.

tyres for 150 each would be absolute shitters. The ones you had on it before would be even worse. Tempe have 17" nangkangs for 130, or falcon ziex for about 140.

Those would be the sorts of crap available for that price.

For actual decent tyres, try the falken grb451 or rt615.

assuming he has stock 16inch wheels u can get decent rubber for $150

a friend recently got dunlop sp9000's for his s15 wheels from tempe tyres for $150 each fitted which was very cheap.

Haha i've got the opposite problem, coilovers + hankook K104 235s on the front and the  famed falken ziex ze326  265's on the back, front grips incredibly well, back barely holds the road dry, wet = forget it, may as well be running slicks...

I had the same tyres on the rear of my r33 as well. Gripped 'ok' in the dry, and i lost it in the wet ;) Was probably my fault for loosing control, as once it came out i had no idea how to control it...

Took it to a tyre shop and they said theyre very poor tyres in the wet... goes to show good tyres pay off, i'm only running on nangkangs ns-II now but i think theyre even better. Goes to show, decent tyres, can perhaps even save a car.. and in my situation.. a set of work rims that 'were' perfect.

Dayne B)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...