Jump to content
SAU Community

Recommended Posts

I have an RB20det flywheel that im using to bolt my R33 gearbox to an R34 25t. There is however a 'nipple' next to the 6 main bolts on the motor which the flywheel doesnt have a hole for. Check the pic below to understand what i mean-

This is the motor, you can see the nipple in between the two holes on the left.

DSC02139.jpg

My flywheel below as you can see doesnt accomodate this nipple, im guessing this is because im using an older flywheel on a new motor? Is this something that Nissan added in the R34 motor?

DSC02143.jpg

So, my mechanic is coming tomorow morning to put everything together and drop it into my S14 and i just descovered this issue. I need it sorted streight away. Can i simply saw this nipple off? I was going to do that but thought id make sure this is alright and the right thing to do before i take a saw and hack into my new motor :O .

Edited by DRFT 14
Link to comment
https://www.sau.com.au/forums/topic/101620-help-bolting-flywheel-onto-rb25t/
Share on other sites

I have an RB20det flywheel that im using to bolt my R33 gearbox to an R34 25t. There is however a 'nipple' next to the 6 main bolts on the motor which the flywheel doesnt have a hole for. Check the pic below to understand what i mean-

That's the flywheel dowel pin and all RB turbo engines have one in the crank and the matching flywheel has an extra hole. What you DON'T have is an RB20DET flywheel.....more than likely it's from an RB30E (R31 Skyline or VL Commode) which definately doesn't use a flywheel dowel.

You could saw the nipple off, but better to drill the extra hole in the flywheel. But you might have a bigger problem - if memory serves an RB25DET flywheel is slightly bigger in diameter than the RB20DET (or RB30E) type. What that means is that the starter may not engage with the flywheel you have correctly (but I might be wrong..... :O).

Edited by SteveL

I have asked lot of people and have been told numerous times that the 20t and 25t flywheels are the same. I even rang alot of dismantlers and they all said they where the same?

Drilling a hole on the flywheel itself seems a bit more complicated than chopping off the nipple, so im gonna head off to the garage now and get the saw out. If anyone has anymore comments, let me know :O

I have asked lot of people and have been told numerous times that the 20t and 25t flywheels are the same. I even rang alot of dismantlers and they all said they where the same?

As I said, it's a memory thing......but it's not an RB20DET flywheel, that's certain.

Drilling a hole on the flywheel itself seems a bit more complicated than chopping off the nipple, so im gonna head off to the garage now and get the saw out. If anyone has anymore comments, let me know :O

It's your engine....don't damage the crank.

Like Steve is saying, its pretty standard that dowel (going on my s1 rb25 engine, and flywheel sitting around), and also would add to the stability of the flywheel being locked into place. I wouldn't go sawing it off, I'd make sure you had the right flywheel.

95% positive rb20 and rb25 flywheels are the same (they are always listed as the same part numbers), but I *think* there may be some rb20 flywheels out there that don't fit the rb25 ...for whatever reason(?)

the only flywheel that might not fit the rb25 box may be from a red top rb20 (not certain of course)

but if i was going to b using an r33 box id most likely want to use an r33 flywheel

ur other options are to buy an aftermarket lightweight one, or replace it with one that fits

the only flywheel that might not fit the rb25 box may be from a red top rb20 (not certain of course)

but if i was going to b using an r33 box id most likely want to use an r33 flywheel

ur other options are to buy an aftermarket lightweight one, or replace it with one that fits

The 33 flywheel is the same as the 32 - at least in aftermarket solutions it is anyway..

Hmm, its good to hear the flywheels are the same, and also confoimation on the clutch, as im using the same 5puk clutch that was used in the old RB20 setup. I did howover saw off the dowel. If the non-turbo's didnt have them, im sure mine will be ok.

Cheers for the help guys :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...