Jump to content
SAU Community

Recommended Posts

Does anyone know which R32 front suspension bits are the same as the s14 200sx.

Does anyone know which S13 front suspension bits are the same as the s14 200sx.

Friend knackered the 200 so I need parts cheap.

anyone with any contacts or anything let me know

Riaz

[email protected]

Link to comment
https://www.sau.com.au/forums/topic/10217-help-again-all-r32-owners/
Share on other sites

apparently just brakes and thats about it. but dont qoute me on that though, i havnt really played with 200's that much and to be honest, i dont want to. theyre missn two cylinders and have that dreded rattly timing chain, YUK!

haha great guys, lacking a bit on the info

Blind Elk. I own a 200 and a R33 friend went for a drive knackered it, I NEED PARTS COS I GOT TO FIX MY CAR

friend will have to pay but still its a friend so the cheaper/less he has to pay the better for everyone

IF ANYONE HAS ANY INFO ON THIS PLEASE PM ME

thanks

  • 2 weeks later...

If they are the same, I have R32 front uper wish bone and wheel hubb assembly plus stock shockies (no brakes rotors, or lower wishbone) you can have cheap. What I can tell you is that a S13 I owned had completely different front end to the Skyline I think it was a strut type setup, but most definately differnt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...