Jump to content
SAU Community

Recommended Posts

After watching shows such as the fast and the furious, during the main race you see the green eclipse has a indash monitor which shows danger to manifold and engine readouts

now i have a indash monitor and i wondered how hard it would be to get software or something to show stats on the screen such as fuel, speed, rpm's etc.

i already have an apexi rsm which does all this , but using a colour monitor im thinkin i could go one step better, has anyone done this yet or know anything about it

thanks

Link to comment
https://www.sau.com.au/forums/topic/102605-monitor-preformance/
Share on other sites

Why not go one better and rig your car up like the kit car in Knight Rider??? Make it have a voice and it can tell you whats happening...

As for the other thing, i'm sure its possible, but if you have an RSM anyway, why bother with the expense

After watching shows such as the fast and the furious, during the main race you see the green eclipse has a indash monitor which shows danger to manifold and engine readouts

now i have a indash monitor and i wondered how hard it would be to get software or something to show stats on the screen such as fuel, speed, rpm's etc.

i already have an apexi rsm which does all this , but using a colour monitor im thinkin i could go one step better, has anyone done this yet or know anything about it

thanks

Yep got to watch for danger to your intake manifold it causes your passenger side floor to fall out :P .

34 GTR has a indash monitor for injectors, boost, g-forces ect.

cheers

MOTEC will give you that mate. Hook it up to your screen or Laptop

have u got any more detail about this, like model name or number or something,

im not sayin im gonna do it, depends more on the cost and what i can monitor.

oh yeah and i wanna watch the welds on the intake :lol: :lol: :lol:

have u got any more detail about this, like model name or number or something,

im not sayin im gonna do it, depends more on the cost and what i can monitor.

oh yeah and i wanna watch the welds on the intake  :lol:  :lol:  :lol:

The MoTeC can monitor anything you can imagine.

Im sure if you put a temp sensor on the welds, it will monitor those as well :lol:

and because im such i nice person here you go:

CAMP (Computerized Automobile Multi Player) (more)

CAMP.gif

The HKS CAMP offers drivers the ability to view engine vitals such as RPM, speed, and gas mileage by integrating into a vehicle’s Audio/Video display screen (not included). With the addition of the CAMP Junction box and optional sensors other engine functions can be monitored (boost, pressure and temperature).

Analog Display - The analog display can indicate speed, RPM, gas mileage, fuel consumption and injector opening percentage. The CAMP includes peak data memorization and allows the scale to adjust according to current driving conditions.

Digital Display - The bar graphs along with digital numbers indicate multiple data to simultaneously observe entire vehicle conditions.

Alarm Feature - This allows the user to set a designated limit for each data. CAMP will inform the user by sound and graph if any data passes the limit.

CAMP2.gif

I second the consult software. $100 for a cable, hook it up to your carpc or laptop, and use the free software. This will show you everything the consult cable puts out.

Newkleer is making a new consult software, so I recken it'll be the goods!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...