Jump to content
SAU Community

Recommended Posts

Hi all,

Getting on the track for the first time next month, got a couple of questions

What sort of helmet is best?? I would think open faced, and they need to be ADR approved right? and motorbike style helmets, just they'res some nice open surfing helmets etc.. on ebay. Where do you buy them from?? any other places than motobike shops (who charge an arm and a leg).

was thinking something like this:

http://cgi.ebay.com.au/Excellent-Black-ARA...1QQcmdZViewItem

Searched for tyre pressure and could only find one post where they said 40psi is best - i have hankook k104 235/45/18s on the front and falken ziex (yes crap i know) 265/35/18s on the back.

Any other advice for a track noob??

Cheers :D

Link to comment
https://www.sau.com.au/forums/topic/103019-first-time-trackday/
Share on other sites

Hi all,

Getting on the track for the first time next month, got a couple of questions

What sort of helmet is best?? I would think open faced, and they need to be ADR approved right? and motorbike style helmets, just they'res some nice open surfing helmets etc.. on ebay. Where do you buy them from?? any other places than motobike shops (who charge an arm and a leg).

was thinking something like this:

http://cgi.ebay.com.au/Excellent-Black-ARA...1QQcmdZViewItem

Searched for tyre pressure and could only find one post where they said 40psi is best - i have hankook k104 235/45/18s on the front and falken ziex (yes crap i know) 265/35/18s on the back.

Any other advice for a track noob??

Cheers :)

An open face helmet will be fine if that is what you want. I use an open face Arai because I get claustrophobic in a full face helmet. It should be to the relevant Australian Standard (or an FIA standard such as SA2000 or just recently SA2005). See schedule D of the CAMS manual for a full listing. They don't have to be very expensive, but remember cheaper usually means heavier & in an accident heavier means more damage to your head. Depending on how serious the event is you may need such things as a level 2S CAMS license. No big drama.

Most important thing to remember is - HAVE FUN. Most people suck really badly when they first start - it is only by practising that you get better. Look after your car - particularly your brakes & if others are coming to overtake you stick to you line & allow them to go around. It works much better that way. So enjoy yourself, talk to your fellow competitors & if possible follow someone around the track who has been there before and knows which lines to take through the corners.

Edited by djr81
  • 1 month later...

You think you may know the lines, but you wont. Follow someone else who is doing well and over taking everyone and just try and stick to their line. If you can mimick them it will give you a starting point on the what line to take. I found that the best way to get a descent start on my first race meet. Last race of the night i ended up coming 5th outta the 20 odd cars. Thought that was pretty good for my first time racing. First two race were shit house though, came like 14th and like 11th. So dont expect too much of yourself.

Enjoy it. Its great fun.

I race a white r33 with a really lame sticker configuration on it which my father chose. Gold rims. Might see ya around sometime.

re helmets go closed face if you can, some operators won't let you use open faced, and if yuo even drive an open car you wont be able to use an open faced helmet either.

The most important thing about a helmet is whether it is comfortable or not....so pay the extra, go to a bike shop with a big range and try on everything until you are happy. They need to be snug but not tight and if you wear them fir a while yuo will feel the difference in shape some are really uncomfortable for some heads.

Tyre pressures...with road tyres keep them nice and high, between 40 and 45 hot. The 326s are shit and will ruin your fun for the day, so when you buy new tyres buy something decent it makes an amazing difference.

Other advice...same as r33_racer.....road driving habits are no good on the track, when you are out for yuor first time you will brake way too early, turn in to the corner way too early and go thru the corner way too slow....ideally you should take the time to go out with someone who knows what they are doing you will be amazed how different the right lines are to what most people take.

And take it easy at first, you car is a road car and will overheat - oil, brakes, tyres. If you want to stay out there do 3-5 laps then 1-2 slow laps, then back on it again. Keep an eye oil temp and water temp.

And take a break it is hard work and when you are tired you make mistakes :)

And enjoy!

And take it easy at first, you car is a road car and will overheat - oil, brakes, tyres. If you want to stay out there do 3-5 laps then 1-2 slow laps, then back on it again. Keep an eye oil temp and water temp.

such a good point. i used to always try and be the enduro hero and do all laps in the session. it's not always a good idea as you will just wear out your car that much quicker. you car may only last 2 10 lap stints but could have lasted 5 or 6, 5 lap stints.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...