Jump to content
SAU Community

Problem With Hicas On R32 Gtst

Hui

By Hui,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

Hui Enthusiast

Hui

Posted
Posted

Hi all,

I was driving today and all of a sudden the hicas light came on, nothing happened at first then after a while the steering got heavy and would jerk when i turned. the other weird thing is that there's a tapping noise coming from under my feet which i can hear and feel when i turn the steering. I am at a loss as to what the problem could be i ran a search but didnt turn up anything useful any help would be much appreciated

Link to comment
https://www.sau.com.au/forums/topic/103136-problem-with-hicas-on-r32-gtst/
Share on other sites
[200] Mentor

[200]

Posted
Posted

Hui,

Usually when my light came on it was caused by low fluid level in the steering resevior, check that. as for the knocking noise, perhaps a steering shaft universal is starting to fail of is hitting something, check also the steering shaft rubber dampner

Hui Enthusiast

Hui

Posted
  • Author
Posted
Hui,

Usually when my light came on it was caused by low fluid level in the steering resevior, check that. as for the knocking noise, perhaps a steering shaft universal is starting to fail of is hitting something, check also the steering shaft rubber dampner

i'll check them out 200 thanks

Hui Enthusiast

Hui

Posted
  • Author
Posted

i got another problem i think theyre related my battery died this morning and alarm was goin off. chargeed it took it for a drive, the steering is still twitching and hicas light flashes on and off. need help please, has anyone had this happen to their cars before?

Hui Enthusiast

Hui

Posted
  • Author
Posted
Have you reset the ecu?

Just a thought, could't harm anything if it is a fault in the programming or something

Yeah mate tried that and ran diagnostics no faults came up but i still got the same problem. i charge my car up drive it hicas light comes and steering wheel tugs when i turn, leave it over night battery dies again when i go to start it in the morning and this batterys brand new, its freking me out

sidewazegtst Collaborator

sidewazegtst

Posted
Posted

You can try checking that your altenator is charging the battery properly and if it is, then you've got a draw. Meaning despite the car being off there's still power going to something and causing a drained battery come morning. Worth a check anyway.

As for the HICAS prob, maybe be a sensor problem that only acts up periodically and was fine when tested it, most likely (knowing your luck) it worked fine then and then crapped out later on you. These things are hard to trouble shoot so the next time the light comes on, do the test then. Hopefully you'll get an answer.

Good luck.

Cheers B)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      WGNC34 - floor mats

      By GTSBoy · Posted

      I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • MBS206
      R34 Skyline climate control unit transistor

      By MBS206 · Posted

      Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Murray_Calavera
      Tein Circuit Master- rebuild worth it?

      By Murray_Calavera · Posted

      Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • Duncan
      NC MX5

      By Duncan · Posted

      I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Duncan
      WGNC34 - floor mats

      By Duncan · Posted

      Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...