Jump to content
SAU Community

Recommended Posts

  • Replies 103
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...
  • 4 weeks later...

i did have a bit of trouble adjusting at mallala - i noticed where i used to be able to stay in 3rd on the front straight - i'd have to shift to 4th with the 25 box. BUT now i just decided to start my entries earlier and clutch it in 3rd lol...

BTW - the reverse lights do work - i re-clipped mine in and they both work good as new.

r33 are 3.79 though, i might pull my diff out and suss what it is before i worry to much about ratio's :spank:, there are ups and downs of going either way atm so im a lil up in the air which i should buy (r32 box or r33)

edit: im pretty sure the diff in my car is only a s13 type so at a guess the ratio would be 4.08:1?. and i thought 4.3 were auto gearsets? :ninja:

Edited by toffy

nah all R32's were 4.38 auto and manual

ca turbo s13 were also 4.38

with a 20 with a 25 box I'd say you'd need the short ratio still

with a 25 motor and box or a stroked 20 the sr s13 ratio might be better

all depends on the track you go to most though to

cheers for that info, mainly i go to baskerville which is mainly a 3rd gear track first turn is right at the top of third (140ish?+?) you hit the apex at around 115-120 and bounce the limi and scando for the next turn which is about 95-100 at the apex which is a down hill section s bend thingy coming out of that is a short straight which leads into another left hander that opens up on the exit to an up hill straight to munji as fast as you can :laugh: , im worried that if i have a shorter 3rd i wont have the speed for a big enough entry in turn 1 which is vital in comps and the exit corner and straight you need just as much speed really :laugh: :laugh:

  • 2 months later...
  • 5 weeks later...
would be good if I had a part number for a 33 speedo cog though

O rly?

32743-30P20- (Just the cog on the end)

Now it'd be good if I had some money...

post-11389-1180679868_thumb.jpg

32744-35F00 - generic nissan

post-11389-1180680317_thumb.jpg

post-11389-1180680326_thumb.jpg

post-11389-1180680336_thumb.jpg

Edited by TonyL
i have a 33 box with the speedo drive... i need to get the navara drive lol... also gotta replate that plastic drive behind my dash.. cause its rooted

i've still got the name of that place in wingfield that can apparently make metal ends for the cable - haven't been there yet though because... well silvias are electric so i dont give a f**k :lol:

whats the chassis code for navara?

Note: i haven't read any of this thread :cool:

Edited by TonyL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around with a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
    • Yep, this bit another local owner. I caught it before putting the transmission back into the car, what I noticed was the pressure plate fingers weren't flat and even. It's more obvious with the pull style clutch because the throwout bearing ring was visibly not flat once everything is put together. Nismo should really update their instructions to call out this specific detail. I'm not even sure the clutch as-shipped orients everything properly.
×
×
  • Create New...