Jump to content
SAU Community

Recommended Posts

I've done a search, through 40 odd pages, and i can't quite find what i'm looking for, but i may be mistaken so plz don't think i'm lazy.

I have a friend who is offering me his 1 month old 19"rims for $1100 but my question is reguarding road laws.

As far as i know you can increase the size by 25mm? is that correct?

This also means if you get lower profile tyres you can get bigger rims??

I would just like to know if i can get that thinner of a tyre to make them legal to use on the road.

Last thing i need is another reason for them to canary me again.

Any feedback is appricated :P

Link to comment
https://www.sau.com.au/forums/topic/103515-19-inch-rims-query/
Share on other sites

ok the actual law in victoria you cannot increase the overall rolling diameter of the tyre greater than 15mm. and 25mm wider. Now saying this, most people have illegal rims and tyres on their cars, its not something that is really enforced much but can be used to void insurance if they want to get picky on things.

It is 25mm past the largest stock rim for your model.

ie an executive commodore can have 19's because the SS has 18s.

so with an r33, the largest wheel you could legally have would be 18's (?)

But as mentioned, not too many care

lol still confused...

stock for gtst's are 16, well mine are anyway.

so that means, if its 2 sizes i can go 18, but if its 25mm thats only 1 inch. i'm gonna look at the vicroads website and see if i can find anything there

Edited by Raikkonen

Yeah if +2" then r33s u can go 19" r34s u can go 20"s...If thats the case. But owning an R33, id say having bigger rims is he least of your problems. If they dont pick on that they will find something else to d!ck u with!

$1100 for 19"s if u like them, what are u waiting for? :P

lol still confused...

stock for gtst's are 16, well mine are anyway.

so that means, if its 2 sizes i can go 18, but if its 25mm thats only 1 inch. i'm gonna look at the vicroads website and see if i can find anything there

i think u're getting confused with the terms used....

and another thing to remember is what is legally allowed, may not necessarily be the same as what ur insurer will allow (which really sux sometimes!)

according to vicroads (i've spoken directly to them in the past):

- the rim WIDTH can be increased 25mm or 1 inch.

- the rim DIAMETER can be increased 2 inches from what is noted on the little sticker on ur car which indicates what wheel and tyre size the vehicle was issued with.

as most will tell u tho, sometimes the vicroads regulations are a little ambiguous and depends on who is reading it and interprets the regs. if u're really worried, i would suggest talking to ur insurer first - as their limitations are ususally stricter than vicroads anyway!

Adding to what SWC945 said, with insurance issues. U also have to be careful with insurance companies, they take your money no matter what!

Im with Just Cars, and i know that theres a few things that VIc Roads and EPA wont allow on the car, yet Just Cars still insures me and knows about them (EG: Power FC).

So what happens to me if something happens? I probably wont get payed out, but to me thats not fair because Just Cars should have told me im NOT allowed to have the Power FC and so on if the items illegal.

I shall be upgrading my rims soon also (x10" and x11"), will let u know with what Just Cars says :D

yeh but kelly they only cover "legal modifications", same with Shannons.

It says it in their product disclosure (shannons) and I'm probably the only person who's ever read it :D Anyway I think its left to the consumer to find out what legal and whats not on their own car. I guess it would be pretty hard as a call centre pleb to know whats legal and whats not anyway.

Most people just take their chances I guess (or find out too late).. or if you're smart you hide the mods as best u can. Biggest problem would be if you ran down a pedestrian fatally (or similiar) and the cops turned up to the scene and went over your unRW car.

Anyhoo thats a whole other thread.

Adding to what SWC945 said, with insurance issues. U also have to be careful with insurance companies, they take your money no matter what!

Im with Just Cars, and i know that theres a few things that VIc Roads and EPA wont allow on the car, yet Just Cars still insures me and knows about them (EG: Power FC).

So what happens to me if something happens? I probably wont get payed out, but to me thats not fair because Just Cars should have told me im NOT allowed to have the Power FC and so on if the items illegal.

I shall be upgrading my rims soon also (x10" and x11"), will let u know with what Just Cars says :P

i'm also with just cars so i'm looking forward to hearing your report :(

R32 are 16's

R33 are 17x9 +30

R34 are 18x9 +32 i think

I thought that R32 GTR had 17' wheels.... but some poking around has proven me wrong (just wider).

As part of compliance, I had to have some 'tyre placard' on my car (under the bonnet, or passenger side door or something).

It *does* list 17' wheels on it. I guess more of you would have access, but I can post a copy of it up if you want.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...