Jump to content
SAU Community

Recommended Posts

just had my car tuned made 265rwkw on 17psi. On the dyno using the lap top software the car registered no pinging (30-40 on full load). Now we took it for a drive on the road and its making 140 knock on the hand controller.. im puzzled!

The tuner and my mechanic listened carefully but heard no pinging. but at 140 knock on the hand controller would definately be heard when driving or near the motor. So my question is is my knock senser dodgy? or is it too sensitive and just picking up engine noise etc?

Has this happened to anyone before?

Link to comment
https://www.sau.com.au/forums/topic/103597-power-fc-pinging/
Share on other sites

the first step would be to isolate what load point its coming from, clear the max knock value, plod arond and see if it spikes up again. if it does then its in the low load area (unlikely). clear the max again and do some medium cruising and check the max knock (likely to be the cause). then try some heavy driving and see if knocks consistently. if you are able to reproduce it try IGN/INJ retard a few degrees of timing and see if that helps it, if so its just a few load points where the timing is too high. if you can make the knock go away by taking out a few deg then get a friend to drive and punch it, watch map tracer and wait for engine flash to come on and pick what cell is doing it, then goto IGN and back out a few degree's for that cell. you should narrow it down within about 5 minutes of doing this.

dyno tuning is fine but road driving does change the load a little, for example going up a slight hill in 3rd will have different load variances to a fixed dyno if that makes sense. nothing to be worried about just a few points need to be smoothened out on the road.

nice power you made, thats on the gt-rs yeah ? good stuff :)

Paul/R31 it does not knock all the time. most of the time i boot it and its fine but sometimes the light comes on. The laptop read very low knock levels so im not surew which to believe. The mechanic and tuner said there was definately no knock but the sensor says otherwise.

Yeah making 260rwkw on GTRS on 17psi with more in it. They still have not played with the exhaust cam as my exhaust manifold (one of those stainless ones) cannot flow enough and boost begins to spike. Next step is to get a custom manifold and go for 20psi :P

you generally dont hear the ping @ an audible level while driving.

I reckon it'll be just one cell or two thats causing the problem.

Its very easy and common to happen as dyno/street are different.

You arent say... riding @ 4000rpm then planting it on a dyno etc.

Just different conditions which... probably a cell or two :P

im tending to think my sensor is just picking up engine noise and is too sensitive. I cant hear any pinging so it should be ok?

What R31Nismoid just said, you can't hear audible detonation and thats what kill's engines.

Do what paul said try taking a few deg out on the overall correction to see if it makes a difference.

Also the load on a dyno can be a little differnt on the street, i've seen up to 3 load point change from what was being read on the dyno.

just had my car tuned made 265rwkw on 17psi. On the dyno using the lap top software the car registered no pinging (30-40 on full load). Now we took it for a drive on the road and its making 140 knock on the hand controller.. im puzzled!

I'm surprized they tuned it with knock that high on purpose :P

After my tune I too had a little knock when jumping hard on the throttle at around 4000rpm.

I think you'll find that it is most likely slightly overboosting into a cell that would'nt have had an overboost situation on the dyno run.

how much timing in the tune...

usually knock levels around 20 at full boost and high in the rpms is your goal on the dyno. as when you drive it on the street knock levels increase as street driving has different load....

i would say the tune is to agressive....timing is not the only thing that makes power.....

hope this helps.

same here, tuned my car on the dyno, 20 knock, and then took it to the street and pinged up to 80 - 100.

Dyno's don't load the car as much as the road.

Get it re-tuned. Or DIY the ign retard on the street if you have a datalogit.

i have the same problem, genrally in 3rd 4th boosting up a hill...

i think my car is going slower and the engine is making a groaning noise.

i wouldn't do this too much, if you can hear the engine straining downshift or something

I think you'll find that it is most likely slightly overboosting into a cell that would'nt have had an overboost situation on the dyno run.

I had the knock on the street when mashing it around 5000rpm in 3rd.

It certainly wasnt over boosting... just one cell had a slightly off value.

Its really a 5 mins (at the worst) fix if you can remember approximates of what RPM/Speed/gear and throttle position (usually WOT) then the tuner can work that out no worries

Just had it out last night. No problems at all. reving it hrd as and knock didnt go over 11. seems ok. no idea maybe cause of the heat?

pretty much.

As i said (a few times) it'll be one or two cells that have a slightly higher ignition value.

Next time it happens, note down roughly what speed/rpm/gear etc and tell your tuner. Should be able to fix it and it'll never happen again, heat or otherwise

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
    • I also got the same floor mats for a bit of extra bazzaz haha
    • Some more close up pics now that I’m back to working on the car, the loop pile is nice but again haven’t compared it to the other types in person, it’s hard to tell from the pics on the website. View of the hemming on the edges too, it comes in 2 pieces - front and back, honestly very happy with it for anyone on the fence.  Also attached my previous pics from further up as it didn’t let me post them directly before. (Nothing worse than photo bucket pics that aren’t hosted anymore years later)
×
×
  • Create New...