Jump to content
SAU Community

Recommended Posts

Hi everyone I really need some advice from you guys.

I have a Series 1 R33 Sedan - the one with the ugly taillights lol.

I'm in the processes of doing her up but I can't get past the lights. Anyway I want to do a conversion to Series 2 taillights.

So basically I want to rip them out and chuck in series 2 ones. Has anyone done this before?

What I need to know is, is it possible?

Thanks

PS. Below are the only two pics that I could find the 1st a series 1 (silver one) and the 2nd a series 2.

http://www.skylinesaustralia.com/photopost.../big/perpage/12

http://www.skylinesaustralia.com/photopost...door/perpage/12

the 2nd one is Impul version isn't it?

Hi no the second pic is just a Series 2 sedan.

Most people hate the back of the R33 series 1 sedan & because the series 2 sedan is so rare, most people do not know it exists.

Rarity - that's one reason why I want to do the conversion.

Jlnewton, you must have one of the only series 2 R33 sedans in brisbane. Good on you they look sweet.

Does anyone know any contacts in the spare parts industry?

I contacted about 20 places on saturday and not one of them has series 2 sedan tail lights. Over half didn't even know that there was a difference between the two series.

It's hard enough finding skyline sedan parts as it is.

Thanks

Try Justjap, they may be able to source some for you.

Thanks chaos, i'll try them in the morning!

Do you know anywhere that would possibly have them in stock? Or if it doesn't take too much time could you please give me the names of the main mobs that you know in Australia?

Thanks

i think its called Alljap aswell, there a wrecker on the northside i believe (not 100%) sure. Justjap are located in Sydney but they always over night their parts etc as i've bought a few things off them.

Also go to the buisness trader section on the forum and ask around there, they may have some or can source some aswell.

Also, the only difference I can notice with the lights is that the blinkers are in a different spot.

Would that be a problem or do you think that it would be easy to get around?

And Chris I'll let you know the end result.

Thanks

I have picked up the lights and the centre garnish today & they are in perfect condition. The car I got them off was a 1997 series 2 40th annerversary special edition and it alsol had a special edition spoiler.

Anyway the spoiler looks great but the guy won't sell it without the boot. My question is would the boot also be interchangable with my series 1 boot?

Thanks

Edited by jcsky2005
I have picked up the lights and the centre garnish today & they are in perfect condition. The car I got them off was a 1997 series 2 40th annerversary special edition and it alsol had a special edition spoiler.

Anyway the spoiler looks great but the guy won't sell it without the boot. My question is would the boot also be interchangable with my series 1 boot?

Thanks

Yup. Congrates on the find.

There are a few series 2 sedansin Bris. My new one obviously, my old one is still getting around here, and I have seen a purple one, white one, two other silver ones, a creamy/off white one and a dark blue one.

Yup.  Congrates on the find. 

There are a few series 2 sedansin Bris.  My new one obviously, my old one is still getting around here, and I have seen a purple one, white one, two other silver ones, a creamy/off white one  and a dark blue one.

Yeah thanks.

Both lights and the garnish set me back a very reasonable $450.

Dropped in to see my cousin who is a panel beater yesterday and he reckons that they will slot right in no problems. He also quoted me $100 to prep, paint and fit the lights….I owe him one!

So that’s $550 all up. I took some pics yesterday of the back, so I will post the before and after pics when the cars done.

Jlnewton, what year is yours? And did the back/taillights of a series 1 sedan play a role in your decision twice to purchase a series 2?

The car I got them off was a 1997 40th anniversary and the rear wing and stock body kit was simply just really nice. Shame that one side of the car was in bits and pieces, scattered on the side of a highway somewhere because I really liked those skirts!

Mine is a 97 manual. The main reason for going to the series 2 is the battery has been relocated back to the front of the car, same layout as the R34s. Means a much more usable boot space which is the whole reason I wanted a sedan, to be more practical.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
    • Mine is all -12, I’m running a dry sump in a billet block though 
×
×
  • Create New...