Jump to content
SAU Community

Recommended Posts

Yeah Russ we were 6th in teams. I finished 6th in drivers and Chris 7th in Co-drivers.

Basically we made too many mistakes at the start as we were trying to do everything at 10/10th to make up for the lack of power we had. But, if we'd kept our noses clean we'd have been VERY close to the pointy end. I think in the end we made 9 mistakes in 58 events which is about 8 more than you can afford to make.

Whilst there is a lot of cones I really like the cone stuff. There is no better looking car to be handbraked around cones than a GT-R and we still get some damn good results in the tight events. And really most of the cone events are still quite fast.

Looking forwards to next year already. I reckon in my car we'd have come close this year as we'd have been able to play a little safer in the area's we made mistakes on and made up points with the extra HP in the speed events.

  • Replies 193
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Cool. I was pretty happy with my first run, it was hell slow but as soon as the thing went sideways around the first cone I knew I was going to be painfully slow so just had some fun

My tyres didnt end up in near as bad a condition as yours though...i hope to get at least Calder out of them, but i doubt they are much good to anyone other then for some skids :P

good job snowy! must have shit ya knowing the power of your machine!

and roy i know what ya mean the rally can become quite expensive

repairs,tyres, fuel, brakes, time and lack of sleep!!

how was the z tune???

Hey Datsun's are cool. But I know what you mean Roy, 300k is a bit much for a nissan.

Thanks to all the SAU peeps who came down and supported us. Was great to see so many faces and then try to put on a show for you all.

That last motorkhana was cool. (above video) As soon as I finished I just wanted to go right back to the start and do it again.

Highlight for me was taking out first in four events. Was a little unexpected, but I guess all the pushing 10/10ths in the first two days at least got us something respectful.

They are great, i want a 1200 Coupe :)

But, id rather your R33 and say a porn TVR rather then a Z-Tune :)

I had a 1200 coupe before the GTR. I've owned a few over the years actually. This one ended up with a very strong Stewart Wilkins 1995cc L18, and weighed 851kg with 1/2 tank. I'll build another 1200 one day, with a turbo 1200cc engne (I've experimented with a couple of turbo A12/A14 engines already) for IPRA U2L...

4810.jpg

Edited by hrd-hr30

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...