Jump to content
SAU Community

Recommended Posts

UPDATE:

Spoke to the ****wit responsible for my engine destruction and the Einstein claims that he drove the car from his garage to the storage yard and the car died on the way there. Mind you, this means that the car moves 15 metres, then goes down one ramp for another 15, then does a hard right 180° into another driveway and then up another ramp for 50 metres, then about 15 metres to where it was "stored". All the while you would struggle to drive the car at more than walking pace. He claims it happened going up the ramp and obviously isn't taking any responsibility for the damage.

It was so funny I almost laughed.

Almost.

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

It is without doubt a bearing seized up locking the rod solid to the crank ,something had to give.

I have never doubte that. The car was stopped and towed as soon the bearing knock developed.

it is this mysterious 100m drive that is the issue.

Nick and shif_tea

Only problem there is that he doesn't have any laundry...

ross80, thanks for the newsflash, Captain.

nxtime,

my r33 developed a knock and at first i thought it was a noisy tappet so i was on my way to get some new oil, and it seized.

My bottom end bearing spun and disinegrated similar to yours but my conrod didnt snap (however it was ground out by the ring. The grooves in the block were unrepairable, the crank was f**ked and the head was only just repairable with a grind, which i ended up selling for $800.

My dad is a mechanic and he puts it down to a failed oil pump.

You towed it to this place because you wanted to alleviate any further damage and then he drives the car and it breaks????

In regards to how he might or might not of driven it my best friends built rodeo engine spat a rod out two years ago and car was travelling at about 30km/h on cruise do a bearing being starved so it is possible but its no RB so I guess its irrelevant.

You mentioned it went up a 50 metre ramp, so is it possible that if he took this ramp in too tall a gear that the pictured damage could be the result of the excess load and ill bottom end?

wether he thrashed it or idled it doesn't matter.

you towed it there with a problem, then they DROVE it to storage, it broke.

they are liable.

I say go there, with a tape recorder and say "After I had my car TOWED to you with the instruction that it has a knock sound, what EXACTLY happened from that moment until the time my block got a "speed hole". "

it's legal to record a conversation if ONE party knows it is being recorded.

that be you!

What must be considered is that he CLAIMS that the car was driven less than 100m and died going up the ramp.

Now, my car has been driven up that 45° ramp before and even if you gave it 100% throttle, it will not accelerate hard due to the large cams etc.

The bottom line is what he claims and what actually happened are two completely different things.

GTST, you are correct. It came on a tow truck because it developed a bearing knock. It SHOULD NOT have been driven at all.

But Einstein decided to drive it, and by the damaged caused, it most definitely wasn't driven a few metres up to the storage yard. It has obviously been thrashed.

What must be considered is that he CLAIMS that the car was driven less than 100m and died going up the ramp.

Now, my car has been driven up that 45° ramp before and even if you gave it 100% throttle, it will not accelerate hard due to the large cams etc.

The bottom line is what he claims and what actually happened are two completely different things.

GTST, you are correct. It came on a tow truck because it developed a bearing knock. It SHOULD NOT have been driven at all.

But Einstein decided to drive it, and by the damaged caused, it most definitely wasn't driven a few metres up to the storage yard. It has obviously been thrashed.

If u can get him to admit he drove the car at all he will be liable. That fact that u didnt tell him to not drive the car is irrelevant. That would be implied since u had the car towed to the workshop.

Who is this guy btw so i know neva to take my car there!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...