Jump to content
SAU Community

Recommended Posts

Timing belt should be changed @ 100 k k's or 5 years wich ever comes first so a car thats over 5 yeasr old should have a belt replaced .

As for the electronic oddos it only stops amateures not the pros .

Link to comment
https://www.sau.com.au/forums/topic/104324-milage/#findComment-1921106
Share on other sites

Timing belt age would only be hard to determine for the new owner who doesn't know the real kms. Not a concern for the original owner who wound it back in the first place as they would know the real kms. Original owner likely would not care about the new owner's problems.

Link to comment
https://www.sau.com.au/forums/topic/104324-milage/#findComment-1921128
Share on other sites

I've been told that in some cars its a case of swapping the ECU with another ECU of the same model with less kays.

Not so , they have a separate chip for the oddo!

Blueprint , very easy for the pros , even easier than the old none digital odds but impossible for the amatur.

Link to comment
https://www.sau.com.au/forums/topic/104324-milage/#findComment-1921436
Share on other sites

if in doubt, change the belt. i did all the 100km service stuff when my car came into australia despite what it said on the odo, which was obviously wound back.

inspection of the belt showed it was in need of a change as it was cracking in some places. you can just take the cam cover off and check it out.

Link to comment
https://www.sau.com.au/forums/topic/104324-milage/#findComment-1921505
Share on other sites

I remember watching Auto Motor Sport once on channel 31. There was this guy in Germany who used to advertise his service in the paper. He basically has this little device he would plug in behind the dash and type in any number and that would become the new reading on the electric odometer. done in a few minutes.

Link to comment
https://www.sau.com.au/forums/topic/104324-milage/#findComment-1921610
Share on other sites

yeah that's the thing I'm worried abt..my car reads 50,000km....

but the mechanic said my timing belt is getting old.... ..then when I told him that my car has only done 50,000km..he just said..ohh it's okay then....I'm thinking weather he's just trying to rip me off hoping I didn't know anything abt the timing belt...or the Japanese ppl wind back the odometer...huum getting worried, I dun want the belt to snap halfway driving, I'll be in deep shit...

Link to comment
https://www.sau.com.au/forums/topic/104324-milage/#findComment-1922896
Share on other sites

sky 34 - there was something about how to check the timing belt on the supra website (when i was looking for a supra). im pretty sure this is the site (though I could be wrong) -

http://www.mkiv.com/main/index.html

There was a picture on what to check for the timing belt - so see how you go.

Link to comment
https://www.sau.com.au/forums/topic/104324-milage/#findComment-1923041
Share on other sites

LOL you guys crack me up. REVERSE HAHA!

When BMW released thier first electric speedo a guy in britain had it cracked in a blink.

Why would you be interested in how its done? My advise is dont buy a car off you!

Link to comment
https://www.sau.com.au/forums/topic/104324-milage/#findComment-1924424
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...