Jump to content
SAU Community

Recommended Posts

heya mate, yeah i got four 32 rims. think they have re540's still on

Yeah, i just remembered that r32 gtst rims are 15in arent they? unless its gtr r32 rims. Hey how about $2100 plus those r32 gtst rims? how are you going to do this transaction if your not in town?

$50 a wheel, that's really cheap!

can u post his contact detail up

or PM me?

Don't have his details on me, he used to advertise in the trader occasionally, don't know if he still does. If I remember I'll grab the details from work tomorrow.

hey Duc, I'll get Chops to do that.

Hey, I am finished with your R34GTT wheels (finally). Give me a call when you get back in town to come grab them or I can drop them to you somewhere. Thanks heaps for that mate!!!

Chops know his business name and maybe details. From memory he was out Waterloo Corner direction

May well be the same guy, a Polish bloke i think. The guys at work can't get over how cheap he is.

The only thing is that he just polishes, if there are any dents etc that need to be polished out you will need to get that done elsewhere and then give the rims to him. Otherwise you'll just end up with polished dents/scratches.

One of the members on here may be able to help you out in that area as he is a great polisher, might cost ya a couple of dollars but i can vouch for the work-A1. I won't name names incase he's not interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...