Jump to content
SAU Community

Recommended Posts

The only really annoying noise I had was with the factory xanavi unit (the large screen where the cd/climate control etc is displayed). Not sure if it affects those without the xanavi unit but its a clicking/creaking noise like plastic flexing or touching against another plastic surface.

Seems to be located on the top left corner of the xanavi screen and I couldn't determine if it was the plastic surround that all stageas have (the shiny grey stuff) or the xanavi unit itself...

Pressing/thumping in a few different places seemed to fix it for a while...

  • 2 months later...

Found a source of most of my rattles today. Took out the hinged floor panel just behind the rear seat. Found that the hinges have about 20 screws, all were loose and were a big source of noise. Also this panels plastic base rests on the metal body in approx 6 places, used single sided 3mm foam stuck to the floor to insulate it from the plastic. Now it is quieter than its been since I bought it 3 years ago. Highly recommended.

i get a clicking noise on bumps in the rear

not sure what it is

three subframes, two sets of coilovers, and its still there. but its too loud to be something just sitting in the back

the only noise I get is a click from either the gearbox, since shift kit install, when starting to move in 1st. a little click.

real happy with my stag, clean and tidy, good condition. definately a bargain @ 18k almost 3 yrs ago now

  • 1 year later...

This squeak is really annoying now. At first I thought it was A/C belt, but that has been tightened. All belts seem OK.

I think now it is the fan that is making the noise. It is not so much a squeak, but a very high pitched scream. It goes on for 15 secs on cold start only then fades right away but get a rattle from the fan for a while longer.

When cold starting and the noise starts, if I quickly select reverse (auto) the revs drop a bit and the noise stops. The rattle keeps on still.

Any clues before I take the belts off one by one?

I get a clunk from the rear of the car. Probably CV or wheel bearing.

What kind of clunk? I get A deep-ish sounding one (deeper and less repetitive than CV joints) when I'm turning corners in town.

  • 2 weeks later...

The more work I do to the suspension the more noises I seem to create. Up to the full SK bilstien kit now, only problem with that is the generic rubber dust boots dont fit over the shock bodies in the rear so they bunch up and make a noise when going over speed bumps etc. Got sick of stuffing around with upper arm bushes front and rear and castor bushes (none of which gove me any where near the adjustment I needed to get descent amount of +ve castor and camber) so am in the process of replacing all my suspension arms with pillow ball adjustables. All the ones I'm using have dust boots protecting the ball joints but being there is no bushes used you still get some more noises. Not so much NVH as everyone says but the occasional click/clunk every now and again (just when the car comes to a stop) but its not regular enough to annoy me. The handling is worth it. So far have the castor/tension rods and front upper arms in. I have a few interior rattles, mind you I reckon 70% would go away if I fastened the safc and sitc properly inside the glove box and cleaned out my centre console :) Harder suspension also seeks out new rattles. Try to fix them as they pop up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...