Jump to content
SAU Community

Recommended Posts

Hey! I'm currently organizing a group buy of bonnet dampers for the UK Skyline register.

Thought I might ask here at SAU if anyone downunder is interested in joining in. Basically more orders equals better prices.

Here is the original thread

They also make them for the following cars:

Honda:

- EK4/5/9 Civic

- DC2/DC5 Integra

- AP1 S2000

- Jazz/Fit

Subaru:

- GC/GF/GD/GG and new GDBF Impreza

- All 3 gens of Forester

- New/Old Legacy

Mazda:

- FD3S RX-7

- RX8

- NB6C/NB8C Roadster/MX-5

If anyone might be interested please let me know :D

I'm actually located in Japan....hence me organizing it for the UK GTROC.

The ER33 ones will be on sale shortly. They need to modify the BCNR33 ones sligtly to make them fit the ER33s.

There is no hurry on this BTW. I'll give it some time in order to get as many names as possible.

We have 9 people interested so far. I'll post this up on the SDU forum too and see if we can get some more to join. Basically if you are interested add your name like they have done over in the UK. Like this:

-------

-------

1.name

2.name

3....

4

and so on.

REALLY??? awesome, thanks dezz. You guys don't know howw much I really really really feel that these are mandatory on any car!!!

Let me tell you a story, silly, I know. I jacked the car up with the bonnet still on the stand. AS the car went up, the bonnet fell down and smashed my head onto the radiator support. No BS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...