Jump to content
SAU Community

Heavily Modified 1991 Silver R32 Gtr

600ZILLA

By 600ZILLA,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

600ZILLA Community Regular

600ZILLA

Posted
Posted (edited)

I have of late been considering letting the GTR go as I would like to use the money for other purposes.

I have owned the car for over 2 years and have been in the process of building it up almost the entire time. Most work was performed throughout last year and all the work completed by Gavin Wood, Autotech Labrador. Including full rebuild.

The work currently carried out to the car includes:-

(All parts bought NEW unless specified)

Genuine Nissan N1 Block ($3,500)

GTR Crank (replaced)

Adjustable Cam Gears

Apexi Power FC 'Plug N Play'

Apexi Electronic Boost Controller Kit

Apexi FC Commander Hand Controller

Apexi Super Intake kit for 80mm AFM's

Apexi GT Spec Intercooler (no longer in production) 136mm Thick

R33 Gtst 80mm AFM's <Used

Greddy/Trust Oil Catch Can

Greddy/Trust Intercooler Piping Kit

CP Forged Pistons

Tomei Metal Head Gasket

NISMO Fuel Pump

600cc injectors

HKS GT-SS Sports Turbines - Ball Bearing 320hp each

HKS Split Dump Pipes

HKS stage 2 cams and springs

Twin 3" Front Pipes into single 3.5" Exhaust. N1 Style Muffler

N1 Oil pump

N1 Water Pump

OS Giken Triple Plate Clutch R3C

Lightened Flywheel

Apline MP3 Headunit w/remote

Alarm System with Remote Central Locking

Bride Reclining Racing Seats w/genuine rails

Nismo Duracon Gearknob

TEIN Super Street Coilovers (adjusted for Australian Conditions)

(Height and Dampening Adjustable)

Front Strut Brace

Michelin Pilot Preceda Tyres

Slotted Brake Rotors and Bendix Pads

Price: $32,000 $29,000 $28,500 No RWC, No Offers 50% OFF BUILD PRICE!!1!!1 I added up $20,000 in parts alone in my head over the past 2 years.

At present the car is only producing 350awhp @ 1.2bar, If I keep the car and add larger injectors and Pon Cams I can achieve alot more. Everything else is in place including the major labour costs.

Contact: [email protected]

Location: Brisbane

IMG_0364.JPG

IMG_0120.JPG

IMG_0395.JPG

Edited by 600ZILLA
600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted (edited)

350awkw with a couple more minor mods :rolleyes: Most people would know the capabilities of the GT-SS Turbos by now.

I tidied up the original post and adjusted the price to better meet the current market.

Jonathan

Edited by 600ZILLA
600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted (edited)

I will consider part trades such as R32 Gtst, 180SX, Silvia up to around $12,000.

Edit: I should also mention I take very good care of my gear, the car is always under cover and clean throughout. Generally only taken out on weekends.

Around 15,000km since rebuild and most of which was running in and low boost.

IMG_0138.JPG

Edited by 600ZILLA
600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted (edited)

Thanks for the comments guys. My situation has changed a bit and have decided to amend the price.

Price drop $30,000 FIRM.

Edited by 600ZILLA
600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted

Thanks for the positive comments fella's.

The car is a pleasure to drive, I borrowed my mums commodore the other day and I soon remembered just how good it is.

Jonathan

JCMarshall_Law Proficient

JCMarshall_Law

Posted
Posted

From the look of the photos and the list of work performed, this is one of the best modded 32 gtr's for sale at the moment. If I had the money, I'd be making an offer, $30k is not unreasonable. Good luck mate.

600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted

Added to Carsales for $31,000 inc. RWC.

The price $30,000 is without RWC

Otherwise i can remove parts for a cheaper price but would prefer not to do this considering its a couple mods from 360awkw.

Jonathan

600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted

The car requires Pon Cams or similar and larger injectors so around $1400 in parts, some tuning and a bit of labour. I may do this work shortly and bump the sale price a bit.

The difference in price for RWC is because I would need to changeover a couple parts to meet RWC, exhaust possibly and change back over again.

I am also doing contract work and a few hours away from work adds up quickly.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...