Jump to content
SAU Community

Heavily Modified 1991 Silver R32 Gtr

600ZILLA

By 600ZILLA,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

600ZILLA Community Regular

600ZILLA

Posted
Posted (edited)

I have of late been considering letting the GTR go as I would like to use the money for other purposes.

I have owned the car for over 2 years and have been in the process of building it up almost the entire time. Most work was performed throughout last year and all the work completed by Gavin Wood, Autotech Labrador. Including full rebuild.

The work currently carried out to the car includes:-

(All parts bought NEW unless specified)

Genuine Nissan N1 Block ($3,500)

GTR Crank (replaced)

Adjustable Cam Gears

Apexi Power FC 'Plug N Play'

Apexi Electronic Boost Controller Kit

Apexi FC Commander Hand Controller

Apexi Super Intake kit for 80mm AFM's

Apexi GT Spec Intercooler (no longer in production) 136mm Thick

R33 Gtst 80mm AFM's <Used

Greddy/Trust Oil Catch Can

Greddy/Trust Intercooler Piping Kit

CP Forged Pistons

Tomei Metal Head Gasket

NISMO Fuel Pump

600cc injectors

HKS GT-SS Sports Turbines - Ball Bearing 320hp each

HKS Split Dump Pipes

HKS stage 2 cams and springs

Twin 3" Front Pipes into single 3.5" Exhaust. N1 Style Muffler

N1 Oil pump

N1 Water Pump

OS Giken Triple Plate Clutch R3C

Lightened Flywheel

Apline MP3 Headunit w/remote

Alarm System with Remote Central Locking

Bride Reclining Racing Seats w/genuine rails

Nismo Duracon Gearknob

TEIN Super Street Coilovers (adjusted for Australian Conditions)

(Height and Dampening Adjustable)

Front Strut Brace

Michelin Pilot Preceda Tyres

Slotted Brake Rotors and Bendix Pads

Price: $32,000 $29,000 $28,500 No RWC, No Offers 50% OFF BUILD PRICE!!1!!1 I added up $20,000 in parts alone in my head over the past 2 years.

At present the car is only producing 350awhp @ 1.2bar, If I keep the car and add larger injectors and Pon Cams I can achieve alot more. Everything else is in place including the major labour costs.

Contact: [email protected]

Location: Brisbane

IMG_0364.JPG

IMG_0120.JPG

IMG_0395.JPG

Edited by 600ZILLA
600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted (edited)

350awkw with a couple more minor mods :rolleyes: Most people would know the capabilities of the GT-SS Turbos by now.

I tidied up the original post and adjusted the price to better meet the current market.

Jonathan

Edited by 600ZILLA
600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted (edited)

I will consider part trades such as R32 Gtst, 180SX, Silvia up to around $12,000.

Edit: I should also mention I take very good care of my gear, the car is always under cover and clean throughout. Generally only taken out on weekends.

Around 15,000km since rebuild and most of which was running in and low boost.

IMG_0138.JPG

Edited by 600ZILLA
600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted (edited)

Thanks for the comments guys. My situation has changed a bit and have decided to amend the price.

Price drop $30,000 FIRM.

Edited by 600ZILLA
600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted

Thanks for the positive comments fella's.

The car is a pleasure to drive, I borrowed my mums commodore the other day and I soon remembered just how good it is.

Jonathan

JCMarshall_Law Proficient

JCMarshall_Law

Posted
Posted

From the look of the photos and the list of work performed, this is one of the best modded 32 gtr's for sale at the moment. If I had the money, I'd be making an offer, $30k is not unreasonable. Good luck mate.

600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted

Added to Carsales for $31,000 inc. RWC.

The price $30,000 is without RWC

Otherwise i can remove parts for a cheaper price but would prefer not to do this considering its a couple mods from 360awkw.

Jonathan

600ZILLA Community Regular

600ZILLA

Posted
  • Author
Posted

The car requires Pon Cams or similar and larger injectors so around $1400 in parts, some tuning and a bit of labour. I may do this work shortly and bump the sale price a bit.

The difference in price for RWC is because I would need to changeover a couple parts to meet RWC, exhaust possibly and change back over again.

I am also doing contract work and a few hours away from work adds up quickly.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • GTSBoy
      Rear Sway Bar Busshings - Holden Astra TS (2002)

      By GTSBoy · Posted

      I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      Yeah - I mean, go the other way. Smaller range. Not larger.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...