Jump to content
SAU Community

Recommended Posts

Yes Chris, Will be sent off monday along with Wagons. Sorry about the short delay.

For others interested, i wont be running the buy again. its too far for me to drive to make it worth while. PM humble, he could hook you up.

Yes Chris, Will be sent off monday along with Wagons. Sorry about the short delay.

For others interested, i wont be running the buy again. its too far for me to drive to make it worth while. PM humble, he could hook you up.

No problem Alex :)

i would be interested, but i need one pretty urgently now (i was too indecisive previously to join the first gb :| ).

which retail store sell these? or where can i get them from as i need one before the end of the week....

If you need one urgently, PM a member called "humble"

BUT, i dont think he will handle postage etc of the units, rather that is why I ran the group buy.

The units are purchased from Bursons, but at pretty big mates rates, so its not like any walk in can get it.

I am going to run this group buy again, BUT I am going to invest my own money and buy 10 units and just send them off as people join. Though, that doesnt mean they will stick around for ever, Ive already got several people interested so those 10 will be snapped up quite quick.

I will let everyone know what is happening and start a new thread.

  • 2 months later...
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...