Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Personally i would take my car to Gal Smash in Tullamarine..

9330 3137 ask for dave

Tell him you know matt in the Yellow 33

Dude i live in Dandy and i take my car to him, hes a gun and his work is fantastic.. But thats just my recomondation....

any panel shop charges 1.5k to 2k for a respray in da same colour, for 2k you can generally get a complete strip n respray in a different colour...

front bar modification n spray 300 + 150(for the respray)

if ur talkin about the front quater panels to look like the gtr ones, then $400 for the pair + $150 to $250 for respray...

these are general bargains that i have come across in my experience

Depends on what needs to be done.

If you take the car there with all the chips filled and sanded and the headlights removed and trim removed and all that then you can get it a little cheaper, but generally, you get what you pay for.

Is it metallic paint or straight colour?

any panel shop charges 1.5k to 2k for a respray in da same colour, for 2k you can generally get a complete strip n respray in a different colour...

front bar modification n spray 300 + 150(for the respray)

if ur talkin about the front quater panels to look like the gtr ones, then $400 for the pair + $150 to $250 for respray...

these are general bargains that i have come across in my experience

bullshit....that is all :)

hahahaha.......yeah i get ripped off all the time......lets do a quick break down for a good job using good materials...... 4 litres of PPG deltron base about $400 depending on the group of the colour,4 litres of clear PPG (ceramiclear)$600,reducer $120 give or take...theres $1220 before you have included other expenditures such as sand paper,tack rags,prep wash,primer(if repairs are needed) not to mention clips that break or missing when you pull a car completely apart,front rear genuine window seals,and wheres the labour and cost to run the oven?.....should i go on?????

hahahaha.......yeah i get ripped off all the time......lets do a quick break down for a good job using good materials...... 4 litres of PPG deltron base about $400 depending on the group of the colour,4 litres of clear PPG (ceramiclear)$600,reducer $120 give or take...theres $1220 before you have included other expenditures such as sand paper,tack rags,prep wash,primer(if repairs are needed) not to mention clips that break or missing when you pull a car completely apart,front rear genuine window seals,and wheres the labour and cost to run the oven?.....should i go on?????

ok man....no need ta cry abt it....i wuz jus sayin what quotes i've got n the prices that work has been done for.

n u mentioned 4 litres of clear PPG (ceramiclear)$600, first of all lemme know if ur a professional painter? then lemme know y u take 4 litres of clear coat for a car the size of a skyline???

if u r a painter, i can imagine the ripoff..... :lol:

hey guys,

just after a good panel shop in SE burbs.. i got a fair bit of work to do.

i got quoted 2.5k to

respray roof

modify front bar & spray

pump front quarter & spray

think this is a good deal.?

thanks.

observe his question to us, carefully.... Quote "if your painting a full body kit,and flow coating the car...you would most certainly use 4 litres of clear", I don see where he needs all that to be done, but your break down is a classic example of a panel shops quotation breakdown, when they intend to rip u off....

anyways am jus messin wiz u....so dont take it too seriously mate.... :P

any panel shop charges 1.5k to 2k for a respray in da same colour, for 2k you can generally get a complete strip n respray in a different colour...

front bar modification n spray 300 + 150(for the respray)

if ur talkin about the front quater panels to look like the gtr ones, then $400 for the pair + $150 to $250 for respray...

these are general bargains that i have come across in my experience

The thing i am observing is where you quote a complete strip and repaint for 2k.....the thing is theres guys that take pride and use good materials.....so i ran the figures you do the math....its not that hard......the problem is there to many "professionals" who give advice such as you have ......let me ask you something.....have you ever painted a car????

The thing i am observing is where you quote a complete strip and repaint for 2k.....the thing is theres guys that take pride and use good materials.....so i ran the figures you do the math....its not that hard......the problem is there to many "professionals" who give advice such as you have ......let me ask you something.....have you ever painted a car????

nope I get em painted, cant be stuffed painting my car just to save about 500 bucks <_< ....am not a pro, but i have sat through the whole process, cuz i want to see whats being done. do u have to be a pro to know the process as well as the costs involved???? :P

As someone else said.....the bottom line is.....you get what you pay for Happy bargain hunting ....and dont use the pressure cleaner on your car......the paint might sheet off :DNow its past your bedtime......get in your spiderman jarmies and toodle off to nigh nighies :P

As someone else said.....the bottom line is.....you get what you pay for Happy bargain hunting ....and dont use the pressure cleaner on your car......the paint might sheet off :DNow its past your bedtime......get in your spiderman jarmies and toodle off to nigh nighies :P

CLASSIC!!!!!!!!!!!!!!! :lol:

As someone else said.....the bottom line is.....you get what you pay for Happy bargain hunting ....and dont use the pressure cleaner on your car......the paint might sheet off :DNow its past your bedtime......get in your spiderman jarmies and toodle off to nigh nighies :P

I will assume you have experience there.....cuz I have never heard of anyone getting a paint job n then the pressure cleaner sheeting the paint off.....must be the high quality materials being used by u.... :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...