Jump to content
SAU Community

Recommended Posts

I have an 2001 R34 GTT with a new apexi turbo timer and Black Widow alarm. Now that the turbo timer is installed I cant manually arm the alarm until the turbo timer finishes and likewise once the turbo timer finishes the alrm does not automatically arm.

Has anyone gotten around this??

Cheers

Link to comment
https://www.sau.com.au/forums/topic/106206-turbo-timer-set-up-with-alarm-how/
Share on other sites

When I was shopping around, I noticed that this is an incompatibility thing.

I saw alarms that allowed turbo timers to be wired to them, and turbo timers that allowed alarms to operate in conjunction with each other.

That said, I don't know what the workaround is, or whether your gear is compatible, but it could simply be a wiring thing. Might want to ring a Black Widow installer and ask if your model alarm can work with a TT.

if its a bw 10000 then the ign feed to the alarm needs to see 12v for the immobilstion circuits to stay in. so in your case its not possible (easily.)

if you had an Autowatch 456 alarm then you would have an alarm and a turbo timer all in one and your alarm is armed and the car is locked from the time you you walk away like my car

AMEN...

i dunno which autowatch i have, but besides all the sensors, remote locking, turbo timer and all that, it calls me if shit is happening...

i can also start the car from my phone hehehe, but its really illegal... so i tend not to...

I thought that you could just wire in a relay to power your turbo timer when the alarm cut it. I'm pretty sure it can be done, regardless of alarm brand/type because once the alarm cuts the power to ignition, the relay switches straight to the car battery.

I can't quite remember which way it is wired, but if you go to jaycar or dicksmith and get a 30A relay (horn one) (- I'm pretty sure it's the right one), maybe ask someone there how to wire it - it's relatively simple.

Hope it works for you!

I thought that you could just wire in a relay to power your turbo timer when the alarm cut it. I'm pretty sure it can be done, regardless of alarm brand/type because once the alarm cuts the power to ignition, the relay switches straight to the car battery.

I can't quite remember which way it is wired, but if you go to jaycar or dicksmith and get a 30A relay (horn one) (- I'm pretty sure it's the right one), maybe ask someone there how to wire it - it's relatively simple.

Hope it works for you!

your idea is partially correct, HOWEVER if it is a multipoint cut it will NOT work. most alarms reqiure the IGN input to stay active for the car to run. now if you switch that circuit out with a relay the car WILL SHUT DOWN.

the only way to do it if it you drive an auto and the starter is disabled. that will work.

Hi Darn,

I am an custom alarm installer with around 10 years experience. Your problem is easily fixed.

Any Alarm will hook up to a turbo timer.

You need to get a 12v 5 pin 30amp relay. Dont go to Dick smith, they often sell cheap lower voltage relays to you. Go to a reputable place Repco or somewhere.

Repco Sell narva Relay's these are the best

to wire the relay to the turbo timer

- turbo timer (your wiring color will vary depending on model of timer)

- Constant 12v - to an uninterupted 12v source - make sure you use a fuse

- Accessories - helps to set the timer

- Earth - a clean metal part of the car

- Ignition - runs the car when key off

- Park brake arm - Ground sensor - connect to parking brake to arm turbo timer

Relay wiring ( cut the cars ignition wire)

30 - Engine Side of ignition wire

85 - Ground

86 - Key side of ignition

87 - Ignition input of alarm

87a - turbo timer igniton feed

You will also need to use a diode between pins 87a and 87 with the line on the diode facing ( on the same side as ) pin 87a.

Let me also give you a few tips on how to make your car more secure.

1 - Hide the LED - this lets the theif know that you have an alarm and they come prepared - take them by surprise every time

2 - hide the valet switch

3 - keep your keys in a safe place

4 - make sure your installer is qualified and reputible. An alarm is only as good as its instalation.

5 - dont tell people ( not even your mom) what sort of alarm you have. Dodgy people down load all sorts of things from the internet

6 - dont leave valuable's cd wallets etc in plain site

7 - at night park under lights

8 - when you are going to get a park somewhere turn your system down a few blocks before you get there - dont advertise that you a something worth stealing

9 - tinted windows - great for keeping out peeping eyes

There are other things that you can do to a car to make it harder to steal, not impossible, but harder. However due to the nature of wiring specifics or instaltion techniques i will not post this information on such a public forum or PM it to you. Sorry but nowadays you dont know who to trust.

Regards

Pj

Edited by frx026

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...