Jump to content
SAU Community

Recommended Posts

First thing to check. did you renew any of the rear steering arms when you fitted the hicas rack - I presume you fitted the old arms to the hicas lock bar. If you did then do the following...

Jack up the rear of the car to get wheels in air, support on stands and then grab the wheel at a quarter-to-three, try to move the wheel(as the rear steering would have). If you have any movement at ALL then you will most likely need the bushes in the rear hub replaced and the rear steering arms too.

I had Fulcrum at Rocklea do mine in my GTS4 and a mates GTR, they did a pretty good job plus they now have jigs to fit the bushes from doing my car.

Also check that the rear subframe bushes aren't stuffed, the ones behind the doors are silicone filled and the ones near the spare tyre well are solid rubber. The solid ones don't normally cause a problem, just the front ones - which Noltec make.

Good luck

Edited by gts4diehard
Link to comment
https://www.sau.com.au/forums/topic/106288-r32/#findComment-1966692
Share on other sites

yeah i replace the arms with new ones when did the lock bar they looked a little sused ime thinking its the front bushes it looks like there is marks from where the subframe has been hitting the chassis rail any one out there who can help with this

Link to comment
https://www.sau.com.au/forums/topic/106288-r32/#findComment-1969365
Share on other sites

yeah i replace the arms with new ones when did the lock bar they looked a little sused ime thinking its the front bushes it looks like there is marks from where the subframe has been hitting the chassis rail any one out there who can help with this

Get a big screw driver and lever the subframe around, if it moves then you have a problem. Look at the 4 main subframe to chassis mounting bushes, they are filled with silicone. Make sure none iof them is leaking.

They are marked with green dots in the attached picture;

R34_GT_R_Rear_Suspension.jpg

If the bushes are stuffed you can either replace them with polyuretthane bushes, Nismo harder rubber and alloy. This is a big job as the subframe has to be removed from the car. A less expenive (DIY) job is to fit a set of Whiteline rear subframe bushes (AKA pineapples), to supprt the damaged standard bushes. They are around $115 and can be fitted in 20 minutes.

;) cheers :)

Edited by Sydneykid
Link to comment
https://www.sau.com.au/forums/topic/106288-r32/#findComment-1970558
Share on other sites

anyone out thee have solid urathane mounts in there 32 and can let me know whats it like getting conflicting storiesone suse told me that its that harsh i wont be able to even see out the mirrors

even more cool is if someone in brisie has this done can take me for a spin just to ease the questions any help much appricated

Link to comment
https://www.sau.com.au/forums/topic/106288-r32/#findComment-1981943
Share on other sites

Most of the guys with rear subframe bush issues simply add the Whiteline rear subframe alignment kit (pineapples)for ~$115. It is a 20 minute DIY and doesn't add very much NVH at all ie; most people don't even notice it. Much easier and cheaper than removing the whiole rear subframe and pushing out the standard bushes.

:biggrin: cheers :biggrin:

Edited by Sydneykid
Link to comment
https://www.sau.com.au/forums/topic/106288-r32/#findComment-1982478
Share on other sites

Most of the guys with rear subframe bush issues simply add the Whiteline rear subframe alignment kit (pineapples)for ~$115. It is a 20 minute DIY and doesn't add very much NVH at all ie; most people don't even notice it. Much easier and cheaper than removing the whiole rear subframe and pushing out the standard bushes.

:biggrin: cheers :biggrin:

but what if the std bushes a f**ked

Link to comment
https://www.sau.com.au/forums/topic/106288-r32/#findComment-1982512
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...