Jump to content
SAU Community

Recommended Posts

It doesn't matter. I'm sure the owner wont stop being a car fan just because of a little sidetrack like this.

Short sidetrack then. The HX40 I'm running has a 60mm inducer, 85mm exducer on the compressor side, and 19cm (ballpark .84 a/r) twin scroll T4 ex side. I'm at 1 bar of boost in 3rd by 4k-4.2k rpm on an RB25 with 264 HKS cams, no VCT, and a 1.2mm Tomei HG which probably bumps the compression down a little. O yeah, and like I mentioned before, stock RB26 intake with ITB's.

I do think aussie hp numbers tend to be a bit more conservative than numbers over here (which I like), but if I had to guess, I'd say I'm mid to high 500's at the wheels. Tick that down a few percent to equate with your guys numbers like I said. I pegged out of z32 MAF at 5.15v a long time ago with the old turbo (Holset HX35/40 hybrid) and this one pulls more than a fair bit harder.

I know this will rile a lot of guys on here up, but these things out spool and out flow GT35r's all day long. O yeah, and did I mention I got the turbo new for $450USD shipped from ebay? It came on volvo busses :P If you guys want any more elaboration than that, I'll start a new thread.

Do they have a slightly smaller version ? Similar to GT3071R/3076R ?

I started a thread on them, but I think a 7 blade HX35 might be close. I'm not sure what GT30's can do on the top end, but I think the HX35 might be a bit smaller than one. What are the demensions of the compressor wheel? <----please answer in the other thread.

http://www.skylinesaustralia.com/forums/Ho...-s-t247809.html

tooo many farking warriors me thinks...

Bloody long read, but was a good one at that. Even though it was 2yrs ago, congrats Jason on having more balls then most.

Its funny how people continually pick on the little things just to "stir the pot", meanwhile missing the bigger picture.

fark me...that took a good 3 hours or so to read. Extremely helpful and useful thred to read tho - it's given me plus many more others the confidence to push out 25's to the 300rkw mark as opposed to the 270rkw that everyone thought was the sensible limit.

Good work Jason on your research and developmeny! Pity we wont see that reace motor built anytime soon from what i can derive.

And to al the haters/bitches on here...you're all haters and bitches STFU and get in line.

  • Like 1
  • 3 months later...
  • 4 months later...
  • 8 months later...

wow, what an epic read... Excellent effort/research. I would like to say thanks to jason for dedicating so much of his time and resources to this thread. Got a few mates that will be stunned with his results. I'll make sure they are sitting down before i show them :)

  • Like 1
  • 1 year later...

i know this was from a while ago but it was funny to read lol.

also any 1 that think"s a 25 or 26 block is better than a 30 needs to read up about rbs. I love all rb motors

if u had the money to stuff around with the 25 getting that power out of it ( claimed ) or run a 10.8 pass and not post it up so every 1 can see and i would not be a ass bout it

But what i don't get is why?

I have 2 rb25s 1 in a s1 stagea and 1 in a vl wagon and i like them good motor's.

but i can tell u if i had that money i would drop a 26 in it or 3L the bottom end with my 25 head.

Or if u really want u can bore out the 30 to a 3.2..

the other thing i not like about the 33 was the nos. only dick's run nos build the car do go 10.8 with out it.

most jap drag cars don't use nos and some of the time's they get in the gtrs is like wow i just cream in my pants lol

if u had the money to stuff around with the 25 getting that power out of it ( claimed ) or run a 10.8 pass and not post it up so every 1 can see and i would not be a ass bout it

But what i don't get is why?

Nice dead thread resurrection.

Given the thread name is "max hp out of standard RB25" its kindof obvious why an RB30 isn't involved. R33s come out with RB25s standard, if you want to go fast but don't want to (aren't ready to) extend to building a new motor then just doing boltons to the stocker makes things a lot more affordable - the thread is about seeing how far you can run with that.

Here is a video of a mates R33 doing a 10.6 running an RB25DET with stock bottom end on BP98, no NOS etc:

He didn't spend the extra money on a 30 because he wanted to see how fast he could go with what he had :)

yer i know that was his point.

but build it to what can be used on the street every day with out the worry when it will give up.

with what he bolted on i would have tuned it to about 390hp and just run 16psi.

any how he did a good job getting the power he did.

i talked about the rb30et because it was mentioned earlier in the post

also 30 bottom ends are cheap as chips stronger than a 25 and the 25det head will go on with not much trouble and the motor will drop straight in

with that said hope he did well with the new motor

Edited by whitenight27

i know this was from a while ago but it was funny to read lol.

also any 1 that think"s a 25 or 26 block is better than a 30 needs to read up about rbs. I love all rb motors

if u had the money to stuff around with the 25 getting that power out of it ( claimed ) or run a 10.8 pass and not post it up so every 1 can see and i would not be a ass bout it

But what i don't get is why?

I have 2 rb25s 1 in a s1 stagea and 1 in a vl wagon and i like them good motor's.

but i can tell u if i had that money i would drop a 26 in it or 3L the bottom end with my 25 head.

Or if u really want u can bore out the 30 to a 3.2..

the other thing i not like about the 33 was the nos. only dick's run nos build the car do go 10.8 with out it.

most jap drag cars don't use nos and some of the time's they get in the gtrs is like wow i just cream in my pants lol

in english?

  • 11 months later...

I had 330rwkw at 17psi with all the right bolt ons but..

Standard rb25s with 35/40s and big rear housings make alot of "un drivable"

Power, lag lag lag then boost

Around the track a 3037 was quicker with only 280rwkw as it was responsive

What's 500hp if you cand use it

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...