Jump to content
SAU Community

Recommended Posts

Here is a good comarison on what good tyres can do.

S1 best time 1:27.3180 (on Yoka E300 middle of the range street tyre)

S2 Best time 1:22.6884 (on 2nd hand Mich porshe cup slicks)

Same car same day almost 5 sec in time.

  • Replies 389
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hmmm...Love that circuit, so smooooooth ('cept a bit of the north circuit), much more so than Wakefield and a fair bit of EC. Really, really makes me wanna go nutz modding the car to make it better on track days :sigh:

Sorry if I distracted youse all with my flame-thrower! *LOL*

If it's any consellation, my rear bar is f#@cked, hahaha.

P.s Fatz- how much for a RB30 Silvia? That thing was a machine!!

Here is a good comarison on what good tyres can do.

S1 best time 1:27.3180 (on Yoka E300 middle of the range street tyre)

S2 Best time 1:22.6884 (on 2nd hand Mich porshe cup slicks)

Same car same day almost 5 sec in time.

Can i ask where you got the 2nd hand slicks from?

also what size were they?

I currently have 18x9.5 rims with cheap crappy tyres on at the moment. But i would buy a set of R32 GTR rims for the track day and put semi/slicks on if the tyres were affordable

Or maybe some kind person would lend me a set for the day - anyone have spares?

Here is a good comarison on what good tyres can do.

S1 best time 1:27.3180 (on Yoka E300 middle of the range street tyre)

S2 Best time 1:22.6884 (on 2nd hand Mich porshe cup slicks)

Same car same day almost 5 sec in time.

That means if I had been running on slicks, i probably would have been as quick as you in my 13y.o, non-vspec R32, on my first time at OP! :bunny:

...or not.

Here is a good comarison on what good tyres can do.

S1 best time 1:27.3180 (on Yoka E300 middle of the range street tyre)

S2 Best time 1:22.6884 (on 2nd hand Mich porshe cup slicks)

Same car same day almost 5 sec in time.

woah! I've gotta get me some good tyres! :bunny:

ps- your car looked awesome on the track Paul!

I had a friend that run a GT3 in the porche cup last year, they were just sitting around in his garage. The fronts are 18x9 240's and the rears are 18 x 11 290's. The front tyres fit on the original R34 GTR rims, a little small but they do fit. I paid the perfect price $0.

Its like that old saying its not what you know but who you know.

I have about 1-2 track days left on the once I used on Sat and I think I have 3 more pairs of fronts to use after that. Sorry these are not for sale, but when I pick up the rest of them I will try and get some numbes and attempt to source some more for everyone, even if we have to pay $100 per tyre, they would be fantastic for what we do with them.

I will post up if I get any success.

Good time ther Paul L on SLICKS. I ran Hoosier Semi Slicks which are very good although wrong profile as nto enough side wall in rear and wheelspinning a lot as not enough cushion effect I think.

Anyone going to Eastern Creek Next Sunday for Super Sprint? I will there.

Time are here Speed Boat Wins.

http://www.natsoft.com.au/cgi-bin/results....04/2006.ORGP.S2

Apexi AX75F82-P25 Turbo

Apexi GT Spec I/C

Apexi PowerFC

Apexi N1 Coilovers

Noisy Fuel Pump (Unknown)

Bigger Injectors (Unknown)

225rwkw..

etc etc...

It felt pretty good on the day.. my best time was a 1:29.50. My first ever run on a track though, so there is some room for improvement with some decent tyres (Wan Li brand tyres on there at the moment! *Shudder*)

Thanks for the info dude! Very good setup, exactly what I am after! Hopefully will have something very similar in the Cefiro.

Ando

PS Cheers Steve for the PM! :bunny:

Thanks for the info dude! Very good setup, exactly what I am after! Hopefully will have something very similar in the Cefiro.

Ando

PS Cheers Steve for the PM! :O

you're welcome mate. good luck with the build! there needs to be some more nice ceffies out there! :bunny:




  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...