Jump to content
SAU Community

Recommended Posts

Can anyone recomend any body kit suppliers in perth, all i need is a front bar and something on the rear for my R33, i had my eye on a bar from one supplier, but dont know if its against forum policies to mention names and ask opinions?? :(

anyone have any recomendations??

Cam

Link to comment
https://www.sau.com.au/forums/topic/10699-body-kit-suppliers-in-perth/
Share on other sites

Guest KILLER-T

Go to Works auto or is it Auto Works in bentley i allways get them mixed up:confused: anyway i went looking for a front bar and they had the best quality kits by far.The thing i liked most about them was the thickness of the fiberglass nice and thick no chance of warping in the sun :uh-huh:

all i am after is a nice front bar, nothing too over the top like a veilside bar, just neat and looks better than my UGLY standard one, some of the 400R look-alike ones i have seen look good, i do know alot of the places that supply them, but just not sure of the good ones.

hehehe, me a bitch?? im gonna go sit in my corner and cry now :D

hehehe, nah i was meaning the really OUT THERE veilside fronts, i have seen your one and it is nowhere near like the other veilside ones, hey i never even knew it was veilside bitch........ :D

(oops, im back in my corner) :lol:

400R front and i think they are 400R rears aswell, the rear is just the pods that stick on to your existing bumper, i already have 400R sides and a GTR wing, just gotta wait 2 weeks for the pods to come in and then get it all fitted up, works auto took care of it all, so its much easier than having to find a painter to paint them after ya get them...

Cam

paul:

i think i mite cancel it now that i know your associated with the painting side of things, just jokes :) better be a good job, its gonna be a hard one to colour match i rekon :D

Dan:

ummmm not to sure, cause it was just a all up price for the whole lot, fitted and painted, but i think the pods were about $120-$160 just supplied not painted and fitted, but there nice pods, they had 2 different types of pods, i saw the ones that you see alot of around but they had these other ones that were a bit bigger, made it look a bit fatter, so i went for them.

Riaz:

if ya still wanna take a look at the bleeder thats kewl, but still wouldnt mind seeing the bumper just to see what kind of job they did for future reference. but whenever if ya wanna wait till next cruise or so, thats kewl

hope i didnt miss anyone :lol:

Cam.

Cam,

No, I'm not painting them, but the owners of Works Auto have a paint shop associated with them, so you can alwyas get stuff done via the one place.

If you want me to paint it I will, but I wouldn't count on how good it would look.

See'ya:burnout:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...