Jump to content
SAU Community

Recommended Posts

Hi ppls,

I am soon to rip the head off, replace valve springs, headgasket and oil restrictors.

I attempted to remove the oil restrictors out of a spare rb30e I have in the shed. I failed. :(

How are these removed? Is it possible to remove and install new without removal of the motor/sump?

I have seen other (non rb) blocks where the oil restrictor have a thread located in the top section of the restrictor, this allows easy removal.

:D

Link to comment
https://www.sau.com.au/forums/topic/107288-removal-of-block-oil-restrictors/
Share on other sites

Hi ppls,

I am soon to rip the head off, replace valve springs, headgasket and oil restrictors.

I attempted to remove the oil restrictors out of a spare rb30e I have in the shed. I failed. :)

How are these removed? Is it possible to remove and install new without removal of the motor/sump?

I have seen other (non rb) blocks where the oil restrictor have a thread located in the top section of the restrictor, this allows easy removal.

;)

Drill and tap.

Figured as much.

My main concern with drill and tap is leaving metal filings in the block.

I could grab a hoover or something as I drill or make an attachment to fit down the galley after its removed to suck out any possible filings but its always a worry.

Any suggestions?

Hopefully I don't have to report that engine failure Geoff. :)

I'm going to rip the ones out of the vl block and see how far I can push the old restrictors down. If the galley doesn't taper or do anything silly I will push the old ones down and simply drop the new ones on top.

While on the topic.. I've been told the RB26 Tomei headgasket kits from nengun come with the restrictors. RB25/rb20 doesn't. Yet they have similiar price.

Is this really the case or do the tomei restrictors have to be purchased seperately?

Either way I'll drop nengun an email and post back my findings.

Hopefully I don't have to report that engine failure Geoff. :)

I'm going to rip the ones out of the vl block and see how far I can push the old restrictors down. If the galley doesn't taper or do anything silly I will push the old ones down and simply drop the new ones on top.

While on the topic.. I've been told the RB26 Tomei headgasket kits from nengun come with the restrictors. RB25/rb20 doesn't. Yet they have similiar price.

Is this really the case or do the tomei restrictors have to be purchased seperately?

Either way I'll drop nengun an email and post back my findings.

Can you use a 26 gasket with a RB25DE head?

and the r32 rb26 head doesnt run vct either. oil/water galleries would be similar to r32 rb25de? Cylinder size is the same...

Solid lifters are always a bonus.....

Wonder if i should sell my fully rebuilt and ported head, and go the gtr head....? Depends...

and the r32 rb26 head doesnt run vct either. oil/water galleries would be similar to r32 rb25de? Cylinder size is the same...

Solid lifters are always a bonus.....

Wonder if i should sell my fully rebuilt and ported head, and go the gtr head....? Depends...

This is where i am confused. I can get VG30DETT lifters for lsightly cheaper then what Tomei sell their kits for. It would be cool to run 260/10.25mm cams.

The theroy say that solid cams will make more power because they accelerate open/closed quicker, they are lighter etc. But the cost of doing it, only to have to shim/long term maintenance etc...well????

If i spend the same money on the combustion chamber and ports, and stuck with the 260/8.5mm cam ( a cheaper option),how much less power, if any, would it make????

Does having large lift cams hurt velocities/cylinder filling at low rpm like large duration cams???

oh, and this is on topic as ,umm, because when you run oil restrictors, ...well the hydraulic lifters also use oil :P

Hi all , correct me if I'm wrong but aren't the oil restrictors made of brass ? I seem to remember AJ removing one from an L series block by screwing a self taping screw into it and pulling it out with a slide hammer . I dont think the interference fit is real tight .

Cheers A .

Does having large lift cams hurt velocities/cylinder filling at low rpm like large duration cams???

I think this may answer some q's Roy.

http://www.overboost.com/story.asp?id=1132

Especially the 2nd to last paragraph, that says : Synchronizing lift with piston speed keeps airflow at optimal velocities through the ports

Awesome.

I'm a happy man. :P

I've since discovered the tomei restrictors are 1.5mm.

RB30 are 1.8mm

RB26 are 2mm

RB20/25 are 2.4mm

Thanks.

One last question... Does the rb26 tomei headgasket kitcome with 2 restrictors?

Running the hydraulic head I need to keep the two.

Awesome.

I'm a happy man. ;)

I've since discovered the tomei restrictors are 1.5mm.

RB30 are 1.8mm

RB26 are 2mm

RB20/25 are 2.4mm

Thanks.

One last question... Does the rb26 tomei headgasket kitcome with 2 restrictors?

Running the hydraulic head I need to keep the two.

nope, they come with one. They are a very easy thing to make though.

No drama's... I am able to get my hands on another easy.

Proengines.. Whats your view on 2 x 1.5mm restrictors?

Obviously I won't hold you to anything you say as I doubt any one has actually tested, so its an unknown.

But technically speaking, does the hydraulics really need much more oil over its big brother solid?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...