Jump to content
SAU Community

Recommended Posts

What are you going to do regarding the engine harness? The question is, IS the stagea plug the same as a R34 GTT?

If need be, use a R34 GTT harness

There is one for sale at the moment for $400

When my 2 Stagea's get here in approx 3 weeks, I will be able to compare my S1 and S2 side by side, and also have my R33 GTST to compare with if need be.

Also my importer mate has 2-off S2 Stagea Neo engines with "manual boxes" attached coming this week, so I will be comparing them aswell.

  • 3 months later...
  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

i Spoke to John at UAS yesterday, he can supply, fit and dyno tune a power fc onto a S2 rs four s stagea for $2200

Bozidar, who i work with for saikoogarage.com can do an installed an tuned pfc for 1800. You'd probably get change.

And he can sure tune em - he built a 180sx w/ SR20DET up that does 11.3 quarters.

the next thing of course is which specific model FC to get? as there are a few different ones available?

if anyone has a specific part number/model number would be a good thing to go on.

would make life easier when searching the net or shops for prices etc.

Thats really does suck, because i do believe well in my case anyway that it is a waste of time and money going manual, i would just be better off buying a 260rs which im not going to do as of yet anyway, or just going back to an S13/14/15 manual standard from factory.

If you want manual buy a car manual from factory, conversions are always a pain in the arse.... and that is from experience

Thats really does suck, because i do believe well in my case anyway that it is a waste of time and money going manual, i would just be better off buying a 260rs which im not going to do as of yet anyway, or just going back to an S13/14/15 manual standard from factory.

If you want manual buy a car manual from factory, conversions are always a pain in the arse.... and that is from experience

but for the guys who bought their stags a while back when manuals were up around 30k self import and autos were 15 to 20 grand still a cheaper proposition to go manual via a conversion and also with the ratios of manuals to autos it far easier to find a car with everything you want and the colour you want for a good price than a similar manual

my 2c

I fully understand what you are saying, and i give props to anyone who has done or is going to convert to manual.

Basically my point that i was trying to make was its a shame they dont make auto pfc, as i dont intend on going manual, well in the short term anyway.

And im sure a lot less people would go manual if they new they could get pfc for auto.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...