Jump to content
SAU Community

Recommended Posts

Hey guys, whilst driving along the motorway today i noticed my car riding in "d" gear, it got worst and worst and before i knew it, i could barely go up to 30km....the revs would just fly up, and fly straight down, as if in neutral.....what does this mean, it feels as though it jams up in 3rd and doesnt want to go into 4th???

BTW 1st and 2nd are running fine, 2nd gear was wat i used to get bak home, as i revved higher but it was moving unlike "d".

Link to comment
https://www.sau.com.au/forums/topic/108141-auto-gearbox-kapoot/
Share on other sites

the auto's for a r33 are generally pretty cheap. They usually are sold for around the $300 mark i think. Manual conversion would be a lot more expensive (about $3000 so cheaper to sell auto skyline and buy a manual one).

If you want something in between those two figures maybe re-build the auto with stronger internals and a new valvebody etc.

just courious, how many RWKWs could the stock GTST AUTO box take before it breaks?

Chris

Around 250rwkw (or a turbo upgrade) and you'll be wanting to strengthen the box with a bigger transmission cooler.

i just done a auto conversion on my r33 and cost 4500, gone are the days of the 3000 conversion. i am selling my auto to luket01 at the moment for a spare. i can get hold of him and see if he still wants it?

the box is at xspeed and will require picking up from there if he does'nt want it .

sorry probly to far away, in w.a

Edited by Pal

cheers, well before any of this happened, i was going to fix up my car a little and sell it, so im really looking for the cheapest alternative, which would be to buy a 25t auto box (~300) and replace, correct?how much would labour cost for such a job?

also im going to have around 200rwkw, will the stock auto box handle this sort of power easy?

im about to replace the whole gearbox with a 2nd hand one, 500 all up inc labour, though i've been told that i'll need 7L of atf fluid???, i only filled 4L after draining mine, the guy said that its ~4L for the Transmission, and around 2-3L fluid needed for the torque converter???

everyone i heard says around 4L is right

im about to replace the whole gearbox with a 2nd hand one, 500 all up inc labour, though i've been told that i'll need 7L of atf fluid???, i only filled 4L after draining mine, the guy said that its ~4L for the Transmission, and around 2-3L fluid needed for the torque converter???

everyone i heard says around 4L is right

He is right, you'll need at least 7l if the trans an convertor have been drained. Just out of curiosity, did it just go all of a sudden etc, and is it making any nasty noises in any of the other gears?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...