Jump to content
SAU Community

Recommended Posts

Hey guys, whilst driving along the motorway today i noticed my car riding in "d" gear, it got worst and worst and before i knew it, i could barely go up to 30km....the revs would just fly up, and fly straight down, as if in neutral.....what does this mean, it feels as though it jams up in 3rd and doesnt want to go into 4th???

BTW 1st and 2nd are running fine, 2nd gear was wat i used to get bak home, as i revved higher but it was moving unlike "d".

Link to comment
https://www.sau.com.au/forums/topic/108141-auto-gearbox-kapoot/
Share on other sites

the auto's for a r33 are generally pretty cheap. They usually are sold for around the $300 mark i think. Manual conversion would be a lot more expensive (about $3000 so cheaper to sell auto skyline and buy a manual one).

If you want something in between those two figures maybe re-build the auto with stronger internals and a new valvebody etc.

just courious, how many RWKWs could the stock GTST AUTO box take before it breaks?

Chris

Around 250rwkw (or a turbo upgrade) and you'll be wanting to strengthen the box with a bigger transmission cooler.

i just done a auto conversion on my r33 and cost 4500, gone are the days of the 3000 conversion. i am selling my auto to luket01 at the moment for a spare. i can get hold of him and see if he still wants it?

the box is at xspeed and will require picking up from there if he does'nt want it .

sorry probly to far away, in w.a

Edited by Pal

cheers, well before any of this happened, i was going to fix up my car a little and sell it, so im really looking for the cheapest alternative, which would be to buy a 25t auto box (~300) and replace, correct?how much would labour cost for such a job?

also im going to have around 200rwkw, will the stock auto box handle this sort of power easy?

im about to replace the whole gearbox with a 2nd hand one, 500 all up inc labour, though i've been told that i'll need 7L of atf fluid???, i only filled 4L after draining mine, the guy said that its ~4L for the Transmission, and around 2-3L fluid needed for the torque converter???

everyone i heard says around 4L is right

im about to replace the whole gearbox with a 2nd hand one, 500 all up inc labour, though i've been told that i'll need 7L of atf fluid???, i only filled 4L after draining mine, the guy said that its ~4L for the Transmission, and around 2-3L fluid needed for the torque converter???

everyone i heard says around 4L is right

He is right, you'll need at least 7l if the trans an convertor have been drained. Just out of curiosity, did it just go all of a sudden etc, and is it making any nasty noises in any of the other gears?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...