Jump to content
SAU Community

Recommended Posts

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i read threads on here about split dump pipes vs normal 3" dump pipes and it looks like the split pipes have a little more midrange,but the full 3" dump keeps pulling after 6500rpms unlike the split system.

From threads ive read on here^^^^^^^^^^^^^^^

ive been in a 32gtst with gt30r turbo + screamer pipe & it sounded awesome.

i've seen plenty of home made screamer pipes for stock turbos on here for sale and was told the gate only opens after your actuator has reached the stock psi limit (7psi i think) then the gate opens for the screamer pipe.

i myself have a full 3" dump and front from BATMBL

but wouldnt mind trying a screamer pipe after my turbo is hi-flowed.

conclusion: a screamer pipe for a stocker is like a BOV for a stocker.

IMO

My car when it had the Ext Gate.

http://users.tpg.com.au/nismohks/fullBOOST_mas_05_r31.avi

NOTE: I've never head an internally gated turbo sound even close to this.

So dont expect to get anywhere near what the video shows

cheers

My car when it had the Ext Gate.

http://users.tpg.com.au/nismohks/fullBOOST_mas_05_r31.avi

NOTE: I've never head an internally gated turbo sound even close to this.

So dont expect to get anywhere near what the video shows

cheers

aaah, memories

aquariuz6 - mate I have a 3.5 inch cat back system which needs a new muffler.

I'll sell it to you for $120.. a 3inch muffler will cost you about $200

say $50 for fitting

for $370, you will have a car that will sound great and actually improve performance.

a screamer pipe is higly illegal in NSW as it is sending exhaust gases out without going through cat.

In NSW, the fine for NOT having a cat (which is what a screamer pipe essentially is) is $10,000.

now.. you tell me. $370 for improved sound and performance? or $10K for nothing..

if i were to install a screamer pipe... is it possible to install a bov?

just curious because of planning on buying one soon... but i thought that it wouldnt be no use since the screamer pipe already vents the gases from the wastegate??? that true???

bov's and wastegates are seperate things althogether, a wastegate vents air away from the turbine wheel to prevent it from over boosting, and a bov will simply open when u back off to prevent the air going back through the compressor when the throttle is closed

i know the fines 10k for no cat but what is the fine for a screamer? i have mine set up with a flange so i can easily have it on or off coz i luv the sound but dont look forward to the fines even though it is very hard to see it, so yeh anyone know the exact fine for them

ben...

Edited by 2BNVS
if i were to install a screamer pipe... is it possible to install a bov?

just curious because of planning on buying one soon... but i thought that it wouldnt be no use since the screamer pipe already vents the gases from the wastegate??? that true???

Ok, you have things totally backwards as 2BNVS said..

www.howstuffworks.com

have a solid read there. If you are still not clear.

But to go and actually talk to a workshop mate as i feel you could be purchasing parts that you really dont need and wont benefit the performance of your car

doesnt a screamer pipe only loud when the wastegate opens?

so if i were to control my boost... not reving over 4,000 then that my wastegate shouldnt open.... or does it?

btw all new to this turbo side of cars...

also since i have a stock rb25det engine, what good would installing a bigger wastegate to my stock turbo do for me?

i think it wouldnt do me any good anyways because arent the stock turbo's ceramic and can only withstand 12psi max boost before causing any damages?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
×
×
  • Create New...