180 And Shes All Bwaaa Bwa Bwa Bwa Bwa Bwaaa

[LX_SS]

other option is you can get Dr_Drift to do a remap on the ecu which removes the speed limiter

[INASNT]

Waits for ASh to close this thread

[SKY 34]

RSM does not remove the speed limit in my r34....but many ppl said it does...I dunno how that works...

[gts-4me]

i had alook at my ecu and couldnt find the #'s that direct me to the wires what should i b lookin 4

[Starionturbo]

Get a cheap old Apexi RSM, I had one did the trick.

Or if you get a different computer- u can lose it as well.

The wire 53 works but its shit.

[Russman]

get a ap engineering pfc.

gee, in that pick 180 @ 7000rpm!

im at 200 @ 4000rpm 3.9 diff

i dont think it would even be a good idea squeezing the extra km's out if its going way past redline, i know 20s love to rev, but only if they have to gooidies to support it.

Maybe he's in 4th?

I would also recomend dr drifts remap. Will give you more power and will fix your problem. He's also got a dyno to tune it all for a really good price. Give him a call. Sam 0425818755

[funkymonkey]

get a "speed cut defender", it taps into your ECU and stops it cutting out when you hit 180ish. Should cost under $50 secondhand.

[Z1LLA]

get a ap engineering pfc.

gee, in that pick 180 @ 7000rpm!

im at 200 @ 4000rpm 3.9 diff

i dont think it would even be a good idea squeezing the extra km's out if its going way past redline, i know 20s love to rev, but only if they have to gooidies to support it.

I was in 4th in that pic and its a GT-R not GTS-T.

[acsplit]

thanks guys i dont no if i am gonna go cutin numerus wires lol but gotta find a cheap way of gettin around it 4 tha moment as my money is spent on 18'' shift alloys, 3'' humex exaust, t3/t4 turbo, fmic, and them the new ecu also if anyone can help me with intercooler piping would be good as i already have the intercooler (600*300*75) i mite evem go buy the bends and make it my self then post diagrams of it to replicate

Just get your ecu remapped for the new mods and remove the speed limit @ the same time

[blind_elk]

I trust you are on a racetrack when this happens.

Cutting the wire doesn't affect HICAS - the feed to the ECU branches off the HICAS circuit.

[46n2]

here's a thread for you to think about *before* you cut the wire

http://www.skylinesaustralia.com/forums/in...howtopic=108464

[Belsil80]

apparently, when cutting the wire you also cause the element in the AFM to stop self cleaning. im not sure about this but someone could clarify that the element heats up to get any crap off of it?? therfore you only switch it when you need it...

[inark]

other option is you can get Dr_Drift to do a remap on the ecu which removes the speed limiter

i second that.

cheapest and easiest way to do it... plus ti will tune the car to run on our shit fuel and for whatever mods u have. my old 32 went from 110rwkw in stock (apart from catback) form to 142 with the ecu tune and 13psi and also had no limiters (speed or boost etc).

[gts-4me]

how do find out which wire to cut had a look at my ecu and there were no # (i am exited getin my 3'' humex exaust tomoro)

[46n2]

http://www.rb20det.com/ecupinouterror.html

pinout diagram

[slygtr]

More deatils on this Pivot item please

Hi champ this is a link to the pivot speed meter/de limiter if it doesnt work just type in the name in ebay and it should come up.

http://cgi.ebay.com.au/BRAND-NEW-PIVOT-SPE...1QQcmdZViewItem

[TracidTrax]

Hi im pretty sure the rsm will do the job but ive purchased the cheaper and smaller model which is a Pivot speed meter,it cost me $75.

ye if anyone wants to know where u can get these they r on ebay, quite cheap aswell

[gts-4me]

it was crap yeah i did get it past 200 but the revs droped at 140 then 160 then 180 then at 200 i dont recomend it but it was worth a try thanks for everyones advice and directions on finding that wire now i am gonna get dr drift to fix it oh and i did also find out wich wire cuts out 4wd and now i can switch to rwd for drifting / smokin em up cool aye