Jump to content
SAU Community

Recommended Posts

Hi huys for now we are going with a T88 kit which we purchased from doughboy, off this forum.

Again anyone how has delt with chris will know that he has to be one of the best peopl eto deal with when buying car parts.

Thanks again Chris.

anyway

we purchased a T88-33D kit with a Sard wastegate.

We are just getting the kit cleaned and, sandblasted and then ceramic coated.

I'll get some photos up once the kit is put back together all nice and clean.

I thinkthis will be a good test to see what the results are like compared to GT-SS turbos to the T88.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/108613-t88-time-on-our-gtr/
Share on other sites

good luck with it, just wondering y the extreme change from the most streetable turbos on the market to the most laggiest of the lot? more power i guess? :) surely u aint gonna be using the t88 to its potential so y not something b/b and abit smaller, or isnt lag an issue?

cheers

Brad

good luck with it, just wondering y the extreme change from the most streetable turbos on the market to the most laggiest of the lot? more power i guess? :) surely u aint gonna be using the t88 to its potential so y not something b/b and abit smaller, or isnt lag an issue?

cheers

Brad

I'd say with their motor combination they'll probably hit the limit of the turbo, and it will be a good showcase for Hypertune's range of products. I suppose their goals might be a bit more realistic than, say hypothetically, stuffing a big dollar race quality motor into an 1800kg grocery getter? Don't Coles carparks have a 15km/h speed limit? :)

I'd say with their motor combination they'll probably hit the limit of the turbo, and it will be a good showcase for Hypertune's range of products. I suppose their goals might be a bit more realistic than, say hypothetically, stuffing a big dollar race quality motor into an 1800kg grocery getter? Don't Coles carparks have a 15km/h speed limit? :)

maybe cause i want something different, not just another gtr. i want to park it up with people not knowing its fast, which cant be said for any model skylines and people automatically think they are fast, hence more getting stolen, or damaged from jeleous morons.

the motor wont always be in the stagea anyway, as it come out of a vl calais b4, and 2wd is just a waste of time, and r32 gtrs r too old with things looking dated (interior wise) and i dont like 33's at all, and 34's r mad but way too pricey.

i wasnt personally having a dig at 600hp's setup, i only asked the question as to why he went sooo big that was all? its pretty lame that u get shit from just asking a simple question, isnt that the point of the forums?

are we all supposed to just say thats awesome, and never find out y he is actually choosing it?

:)

I agree with you cruiseliner... but you take the good with the bad. Although quite opinionated, this forum would have the most open minded (and knowledgable) people that i've seen on any forum... and thats why i think its one of the best. Bring up something like what BOV sounds the best and its a different story tho :)

Sorry for the slow reply.

the reason we went with the T88 is because we were maxing out the GT-SS we believe, and our engine was built for 800hp.

with the T88 onboard we will rev the engine up to 9500rpm were as now its only 8500rpm.

The 33d is the smallest so, with our engine combo it might not be as laggy as some think.

All we know is no one who has a engine the as the same spec as ours has gone from GT-SS's to a 33D turbo kit, I'm looking foward to seeing what the results are.

Yes there will be more lag but a GTR engine was designed to rev. With our SS turbos max power was at 7500rpm.

I'm sure the max power of the 33D is about 850-880ps.

We will be running up the car with the JUN plenum then with the Hypertune plenum and 97mm TB.

we may also be going to a 150mm intercooler as well.

Just wondering what other cars on this forum have a setup somewhere near the same as ours which has a T88 on it or something else big.

Cheers

I went for a spin with Dexter in his Maroon R32 with a 2.7ltr kit and t88-33d.....response was great...top end was awesome. Ben id say you have made a wise choice with the 33d mate...can't wait to view the results.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • lol no cats running str pipes … might put the high flow back on but I suspect it might effect my ignition timing a bit. 
    • That looks a bit like yellowing to me. If the rear bar was looking like that from rich idle, I'd ask the question, do you have a catalytic converter fitted, and fully working?
    • Oh yeah gets really bad down here. I’ll have to upgrade the heater and wind screen wipers as well for optimal performance.
×
×
  • Create New...