Jump to content
SAU Community

Recommended Posts

Just drove one yesterday. It was very punchy low in the rev range.

I was talking to sales rep that came with me and he was saying he was sure all the power outputs mazda quoted were at the wheels rather than at engine.

I'm sure he is wrong..That means the Mazda MPS with 190kw would have about 250kw at the flywheel..didn't feel like that much.

I reckon my R33 has much better power from 5000rpm on (Im running 175rwkw) but if you missed the jump you'd have to watch out as it gets going quick.

Compared to the liberty GT the low end power is much much better.

Lot of money though 58k when my less than 15k car is probably quicker.

Adv over R33: leather, everything is tigher (i.e no rattles), engine a bit more tractable at low revs, good grip

Disadv: Not as good top end, no tail slides, costs a lot.

Silly to compare old to new but thought I'd add it in for shits and giggles..

Link to comment
https://www.sau.com.au/forums/topic/108770-test-drove-a-mazda-mps-turbo-awd/
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

I was watching a TV show about it where they had some reporters test drive it. Basically the prototype (5 door liftback model) had this function where when you pull the handbrake up it cuts power to the rear wheels, and then when you let it off it put power to the rears with a torque bias to the rear. Essentially making it "out of the box driftable". Apparently Mazda wanted to make it appeal more to the younger generation and see it used in extreme sports like drifting and stuff.

They are awsome looking cars, probably one of the best 'new' cars out there in the range. I've liked mazda 6's for ages, and i thought it was really good how mazda have gone awd, and turbo-charged this time around! I dont see why you'd compare it to your r33 skyline... totally different class. I couldnt justify $58000 though for it, but in saying that i would never buy a new car. If it was my choice, i'd pick the new STi over that anyday!

Dayne

1st thing. That picture is NOT what they look like. They have an extra bonnet bulge. So the bonnet looks like arse. The turbo is TINY, like I think it would be smaller than my std RB20 one. But I guess its all set up differently with the direct injection etc.

I think one of the MAJOR advantages would be, the thing has a factory warrenty...

I would also go the 3l 6cyl Blitzen (sp?) liberty, its the new funky one, and its about the same price. Its got the same power, looks better, def a way better stereo, and its ment to be an awd car from day 1, unlike the 6.

talking to the sales rep ... he was sure all the power outputs mazda quoted

hmm, enough said there I think...

Advantages: You own a 2006 car,

Advantage? You mean its an advantage you're going to get raped 1/3 the value in the next 12-18 months...

I would like to see how it goes in the next few years, to see if it is a popular buy. But i cant see people buying one over a subaru atm. I does not look any different really to a untrained eye from a 6. my opinion really.

Hey R33TOM - you couldn't hear the turbo spooling- very quiet.

It was picking up pretty quick but lacked a bit of feeling I think. Didn't get to put it throught the paces too much though. It seemed pretty competent.

Much beter torque than the Subaru. You'd have to really think about which one you'd take. Subaru is more proven with AWD etc but was dead down low.

I'm comparing it to the R33 because I am sort of thinking of upgrading but can't justify price of new car and R33 does pretty much all I want. It's a 4 door so practical for peoplee to get in and out of etc..boot is pretty small though.

If you read on of the latest wheels or motor mags (i forget which one) they say the mps has it all over the liberty turbo mabob, espically in the handling department. But that probably wouldn't tickle you straight line hero's. (only some of you not all)

talking to the sales rep ... he was sure all the power outputs mazda quoted

hmm, enough said there I think...

Advantage? You mean its an advantage you're going to get raped 1/3 the value in the next 12-18 months...

Exactly, sales reps dont know shit.

When I went new car shopping with the gfriend for her mazda 3 and we were looking at the engine, he tells me that the only things to touch in the engine bay were the thing marked in yellow. They were the dip stick, engine oil cover and radiator cap. I pointed to the powersteering and ac compressor and asked himwhat they were and he said that he didnt know and that we should not touch anything else that the yellow things.

I pointed to the powersteering and ac compressor and asked himwhat they were and he said that he didnt know and that we should not touch anything else that the yellow things.

The thing is, for your average Joe that's great advice. The last thing you need is some moron arse about unplugging shit, and then breaking the car. It heads off potential warranty claims.

Still, its better than those Audi A1's where you can't even pop the bonnet without a key that only the service centres have. So no checking your own fluids, no roadside assistance......

But yes, most sales guys are f**king idiots. They wouldn't know their asshole from their earhole, and they'd sell you both of them if there was a fat commission in it.

Edited by scathing
can somebody post up a picture?

ive never seen one before

http://www.mazda.com.au/mazda6mps/

I hope you appreicate me posting the link for you. Do you have any idea how hard it was to visit the Mazda Australia web site, click the link for their current models, and then choose the Mazda6 MPS?!?!?!?!?

I may need a lie down.

:)

I would like to see how it goes in the next few years, to see if it is a popular buy. But i cant see people buying one over a subaru atm. I does not look any different really to a untrained eye from a 6. my opinion really.

......and how is the Liberty GT any different?

Aside from that ultra-small bonnet vent, the GT is pretty much indistinguishable from a regular Liberty. The exhaust tips are the same, there's no bespoke GT badging, no bodykit, and the GT's rims are nondescript even if they're specific to the model.

And now that Subaru has dropped the Liberty GT, if you want a new car with a factory turbo the Mazda6 MPS has become the only choice.

If I had to buy a cruiser / family type car for that price, and I wanted something new and with warranty etc....I'd be hard pressed to choose between the MPS and the 300C. Depends on if I want show or go, I suppose :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...