Jump to content
SAU Community

Recommended Posts

Will make the jump to SSD the moment they sort the fragmentation issues out. :banana:

Huh?

SSD's by nature do not fragment. Or more specifically, any fragmentation that occurs has absolutely no bearing on performance since there is no moving read/write head and data access is as fast as the bus allows. The only issue with SSD's is a) write speed and b) block levelling algorithms... write speed is getting better and the block levelling is getting to the point where ssd's are having a projected 20 year lifespan with the assumption that you write a lot. Got an upgraded SSD in my EEE (fast one to replace the slow one) and it kicks arse...

-D

very very angry at MSY

ordered a 2079$ build etc, paid for it, rang yesterday and they tell me that they wont sell the i7 unless I do a full system build, fk that I say Ive got a 500$ case, get fk'd! etc etc

was quite irate, ended up having to order the i7 off the net (i-tech), sent a chq off so now an extra (up to) 2week wait.

picked up the goods from MSY and had a shot at them for jipping me (would have paid for it all elsewhere) due to the non-selling i7 (although I got a quote sunday, then again requote on monday, an proforma invoice sent, paid immediately with chq).

Everything ordered and paid for then they tell me to pay more for a system build or get stuffed. geez

so, after having a shot at em again they tell me theyve changed the rules just now and i can have the i7. Pity I ordered elsewhere already.

gah. nothing worse than having good pc gear ready to build and set up (do it in my sleep) but cant 'cause of the supplier.

pisses yah hey.

very very angry at MSY

ordered a 2079$ build etc, paid for it, rang yesterday and they tell me that they wont sell the i7 unless I do a full system build, fk that I say Ive got a 500$ case, get fk'd! etc etc

was quite irate, ended up having to order the i7 off the net (i-tech), sent a chq off so now an extra (up to) 2week wait.

picked up the goods from MSY and had a shot at them for jipping me (would have paid for it all elsewhere) due to the non-selling i7 (although I got a quote sunday, then again requote on monday, an proforma invoice sent, paid immediately with chq).

Everything ordered and paid for then they tell me to pay more for a system build or get stuffed. geez

so, after having a shot at em again they tell me theyve changed the rules just now and i can have the i7. Pity I ordered elsewhere already.

gah. nothing worse than having good pc gear ready to build and set up (do it in my sleep) but cant 'cause of the supplier.

pisses yah hey.

WTF? Can't say I've ever heard of any retailer ever refusing to sell anyone anything..... It's a CPU ffs!

shit thats a first to hear tangles

normally MSY will sell just about anything no matter if it will work with the rest of the stuff you got or not

its absolute bullshit IMHO

did everything right and in the correct business manner, and get dicked around like that

crazy

never mind.

setup the Antec TPQ 1000 psu and the Acer 24" B243W HD 1900x1200 lcd screen, very nice.

looks like I have a buyer for the spare pc gear so thats good (19" lcd, p5e, q6600, 4gb ram, 850w psu)

itching to setup the x58 mobo when i get the i7 chip.... but thanks to MSY that'll be another 10days away. *sigh*

never mind, you cant win them all, BUT - I reckon thats against fair trading, to advertise a product no conditions, invoice and sell the product, then place restrictions and conditions after point of sale

;)

i absolutely hate the waiting game

specially when all your missing is one stupid thing lol

Especially when that one thing is the most important part to a computer... :banana:

Different topic,

I just picked up one of these to transfer my animes off my 500 & 320 HDDs :D .

Also I want to transfer my OS install from my other WD 500GB to my other Samsung 1TB without having to reinstall all my sh*t again. Anyone know of any free HDD imaging software? or do I have to go underground with BT on the major imaging softwares? ;)

Especially when that one thing is the most important part to a computer... :banana:

Different topic,

I just picked up one of these to transfer my animes off my 500 & 320 HDDs :D .

Also I want to transfer my OS install from my other WD 500GB to my other Samsung 1TB without having to reinstall all my sh*t again. Anyone know of any free HDD imaging software? or do I have to go underground with BT on the major imaging softwares? ;)

One word "Ghost" I loath norton products with a passion but when I can install a room of 50pc's in under 10mins I can't really complain. probaby the only good product they made.

Edited by Stagstock

+1 for Ghost

maybe also try acronis true image.

I use norton ghost at home. I install windows, install drivers, activate, windows updates, then image. That way i have a clean copy of windows that is reasonable up to date, so if anything turns south, bam its back without the hassle in about 10 minutes.

Huh?

SSD's by nature do not fragment. Or more specifically, any fragmentation that occurs has absolutely no bearing on performance since there is no moving read/write head and data access is as fast as the bus allows. The only issue with SSD's is a) write speed and b) block levelling algorithms... write speed is getting better and the block levelling is getting to the point where ssd's are having a projected 20 year lifespan with the assumption that you write a lot. Got an upgraded SSD in my EEE (fast one to replace the slow one) and it kicks arse...

-D

SSD's at this point in time are not good work drives.

Issues with sector remap fragmentation degrades the drives performance over time.

At this point in time the only way to fix is to wipe the drive and start from scratch again.

Intel are drawing very close to solving the problem so it should be too long.

Great for a lightly used laptop but definitely not suitable for a workhorse just yet. :P

Edited by TheRogue
SSD's at this point in time are not good work drives.

Issues with sector remap fragmentation degrades the drives performance over time.

Intel are drawing very close to solving the problem so it should be too long.

Great for a lightly used laptop but definitely not suitable for a workhorse just yet. :P

That applies to the Intel X25 only. There are many other types of SSD, intel do not have the monopoly on them, nor are they to be considered competent in SSD technology. No other SSD has issues with 'sector remap fragmentation'. I have a runcore SSD in my EEE and they do not suffer from any said problem.

Intel != all ssd's. TBH it sounds like you're just repeating what you've read from slashdot or arstechnica.

-D

-D

huh, I just went to download the latest version of Firefox on my new PC & it's asking whether I want "English British" or "English US"???

Which one have you guys got?

English US, as we use a US style keyboard (dollars instead of pounds)

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...