Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
hey guys,

can anyone reccomend a good legit FREE pdf reader/editor?

i have tried haxt version of adobe 8 pro in the past, but win 7 64 bit does not wanna know about it

Foxit

Bullzip

CutePDF

  • 2 weeks later...
Most 4870 cards are a bit noisy, trying to keep my system as quiet as possible. 2 4870's also give more performance than one 5870 so worth the relatively small investment

5850 would be good enough by itself, but don't really want to spend that much. 4800 & 5800 series cards are also not compatible:

http://game.amd.com/us-en/content/images/c...combo_chart.jpg

didnt realise they weren't compatible

trying to find a review of the 5870 against a CF 4870 might have to look later

what type of motherboard have you got i did read that if its a 16x/4x you might be better off with 1x 5870 but there like $600

Running a Core i7 920 clocked at 3.2GHz on a Gigabyte EX58-UD5 motherboard. Can run 2 cards at full 16x speed.

If I end up making the jump to a 5870 it won't be until they have halved in price. Not going to happen for a while though, especially since Nvidia is yet to release their competitor. I have a feeling they've been caught with their pants down & weren't expecting ATi to improve as much as it has in the last couple years. Either that or they're looking to make something that will totally dominate, though they may run out of development funds if they don't look out.....

imo ATi will bring a 5990 out soon after the fermi to try and keep a wrangle hold on the market may work it may not i dont know much about Nvidia as they dont hold my interest

that board is pretty nice 3 way CrossfireX or SLI 2 @ 16x and 1 @ 8x

so its the **70 series or nothing you wouldnt consider 5850's i run 2x 4850's in a OC Q6600 and score 18k in 3dmark 06

>>3d mark 06 18916<<

back when i tried a 7800GTX it didnt perform up to the hype and i stuck with ATi

>>3dmark 06 7800gtx 4069<<

>>3dmark 06 x1900xtx 4990<<

Actually for 3 way SLI it works out to be 16x8x8. It splits the second lot of 16 lanes over the lower 2 cards in 3 way SLI. Completely useless though unless you happen to own a super expensive hi-res +30 inch monitor. 2 slots is pleanty :cheers:

2x 5850's would be awsome, but still rather pricey at the moment & a bit overkill IMO. If I can get a second one of these cards it will be by far the best bang for my buck at the moment, just going to have to keep an eye out.

2x 4850's should see some pretty good performance, probably starting to push the limit of your CPU.

yeah 1ghz OC is enough

i didnt read that mobo as that but you would know i only read the stats page from gigabyte

yeah i think 2x 5850 is like one 5870 prolly a little more for the 2x 5850 dont look @ prices or ill want a new system and mine is good enough

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all, I’ve just finished fitting the timing belt on my RB25, following the standard procedure: rotate the crank twice, release the tensioner, then tighten it down. The belt feels tight, and you can see that clearly in the picture below I’ve heard some people say it’s actually better for the belt to be slightly loose rather than too tight, as excessive tension can lead to snapping. So that’s in the back of my mind. What I’m seeing is this:  • At idle, the belt looks fine.  • But when cranking and especially when revving (around 3–4,000 RPM), there’s a momentary flap/flex or flicker in the belt, which I’ve tried to capture in the video. So my question is — based on what you see, is this slight belt movement something you’d consider normal, or am I just being OCD? Could this amount of movement cause sync issues? Or is it just a harmless bit of flex under load?   from what I know belt flap and flex is expected when crank spins up and pull cam with it Would appreciate any thoughts or similar experiences.     IMG_7656.mov IMG_7657.mov
    • I've replaced the front brakes of my NA to 324 brembos and 350z calipers: i'm going for 225/40-18 up front and 245/35-18 in the back. I have Rays 7.5*19 ET35(225/35) in the front with 5mm spacers otherwise the calipers "lock up/ won't rotate". When i use the calculator i come up with 8*18 ET30 for 225/40...... but not sure i get problems with the calipers. Anyone riding around with 18 inch. that can confirm "that it'll fit"? In the back it's 7.5*9 ET30 (245/30) with the 5mm spacers, but there is no problem with the standard small brakes, so i want to take 8.5*18 ET25 (245/35).
    • Lol.. but then.. always come back to a JDM..
    • Glad to hear. If possible, get your tuner to check air's to make sure everything is still where it should be.
    • The problem with FB/Insta/Reddit etc comments relating to cars is simple. You get to ask a question once, and get one round of replies. For things that can actually be answered in a few lines of text, once, it's fine. After 6 hours, your original question is lost to the void. There are no follow ups, additional questions, anything. No project car is ever such a simple list of questions to ask. You need discussion.
×
×
  • Create New...