Jump to content
SAU Community

Recommended Posts

You could potentially configure a squid proxy to cache it all. There appears to be a pro version of ninite which is designed to allow you to easily cache the install data, $20 per month though so unless youre doing quite a number of installs its a bit of a financial outlay to just save you some data.

yeah squids pretty decent, you just have to make sure you cache all the files and not just the common ones - usually theres a limit of a meg or two which won't help much for software installs... you'd also need a huge cache limit too.... dunno if andrew is that familiar with linux tho ;P otherwise he can install slackware in a vm host and just run it on his server/gateway

-D

At a previous place of employment I had setup smoothwall with a huge squid cache limit for that reason, seeing as it has a pretty gui anyone is able to make changes. Also good for blocking outbound traffic so when you're fixing a virus infected computer you don't get flagged for sending out mass amounts of spam.

so $150 is the going rate for a full system install + software they want done also

$100-150 depending on the complexity is fairly usual, the 150 mark often includes basic backup of my docs etc, if they have restore cds and don't want anything else done $50 is often the norm.

I used to do these sort of jobs on the side and I would charge $150, that also included the call out fee to diagnose in the first place.

Edited by Rolls

1Gb DDR3 HIS IceQ4 Radeon HD 4850 PCI-e Video Card

Any gamers out there want a kick-ass budget-priced video card? I have just upgraded to a 5850 so this baby has to go.

Details here:

http://www.hisdigital.com/un/product2-30.shtml

This is THE 4850 card - rated as the best of its generation with dual heat pipes, silent fans and very high/stable performance. NEVER overclocked in any variety, and was run in a system full of cooling fans and temperature control - this card ALWAYS ran very cool - even in warm weather under heavy gaming load.

Comes in original box with original manual, unused sticker, Crossfire bridge and power adapter. Does not have driver CD (always used the latest Catalyst drivers off the net anyhow) nor any DVI/VGA/HDMI adapters (big deal). Has 2 DVI ports (and an S-Video) on the back of the card fyi.

$150

yeah 2 4850s would be ace - but 1 5850 is even better :P .... only reason I upgraded is that in huge 8 player battles in StarCraft 2 it would drop to 20 fps, which is needless to say unacceptable. Was fine in all other scenarios in SC2 though - even at 1920x1200 which I run all games in.

I am wanting to upgrade my PS3's hard drive to something larger. So I am looking at buying this, anyone else want me to order them one aswell?

They also have this type too

yeah Abe, I'll grab one as well.......I'm guessing the only differences between the 2 units is the internal HDD (w/- fan) vs external, yeah?

I'm leaning towards the internal w/- fan......which one are you going for?

yeah Abe, I'll grab one as well.......I'm guessing the only differences between the 2 units is the internal HDD (w/- fan) vs external, yeah?

I'm leaning towards the internal w/- fan......which one are you going for?

That's correct Pete, I am going for the internal Hard Drive type, so I don't have another box sitting outside the PS3 (less cables and mess).

I'll buy them this arvo when I get back from Work, in-case anyone else wants one.

wait for as long as you can in case of further interest Abe then let me know via PM what I owe you with bank details if you like

Sure, I am in no big rush for it, in-fact I would rather get a special little development kit to make the 1tb a bit more useful :mad::ninja:

Steve, sadly my 3DMark06 only made 10,800. My CPU is only a Phenom 9500, which despite being not too dissimilar in performance according to the benchmaking websites, falls WAY short of the Q66000 in 3DMark06. I also have a strong feeling that for some reason my Win7 is really not liking the 5850 after I pulled out the 4850. I played SCII last night and went into a big battle and the card came to a crawl at 1fps - this should not happen no matter what with a 5850. Might be time for me to upgrade my system AND do a fresh install. My mobo will take a Phenom 955, which is only $159, so is a great bang for buck upgrade.Or for $213 I could go a 6 core 1055T - but not sure how much (if any software) will utilise all 6 cores correctly.

My brother-in-law has just purchased 2 x hybrid 500Gb drives for around $170 each. He is going to raid them for his system. I might do the same, as my SSD is so small I can't store my Win7 + programs + Steam on it - which is what I really need to do to improve hard drive performance. The fact that my Win7 loads off the SSD in half the time if I disconnect my data drives indicates they are slowing the system down to a point where the SSD is almost redundant.

Anyone want to buy a GSkill Falcon II 64Gb SSD?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...