Jump to content
SAU Community

Recommended Posts

i read for the R33 when i had mine, that the fuel light came on when there was approximately 7L left in the tank. one could assume the same for the stagea. i've driven for up to half an hour on my fuel light and not had a problem. helps to squeeze that little extra out of a tank

  • Replies 216
  • Created
  • Last Reply

Top Posters In This Topic

i never really bother. Under 1/4 and i fill up.

When installing the fuel pump, i was told the fuel tank design is different in the stagea in that there is a little "pocket" in which the fuel pump sits, meaning it is 100% the lowest point in the tank.

Ive driven around 2 days (~50km) with the light on and my 040 was still able to suck fuel up

couldnt agree more tangles

i filled up $91 the other day.... 66L... yepp... I KNOW ITS A 65L tank :D

Dunno how many litres but $68 for 98/10 from when the light came on.

Currently using 15or16/100.

Would like toget a kickback from AWB.

ok, first re-fill, some very varied driving including some babying (while I had an exhaust manifold leak that sounded scary) some highway cruise, on most drives I managed give it a poke in the guts once or twice, and one rip through a very twisty section of the Ocean Road late one night mid week after I fixed that manifold leak...

390km/51Litres

~13L/100KM

Not bad, I think it could do all right on a long open road trip, filled up with a bit under 1/4 of a tank and got the 51 Litres in so there was ~15L left if it is a 66L tank, that would have been close to 500km to a tank, that sounds all right to me.

I try to fill up around the 1/4 tank mark as it doesn't hurt so much, just more often I guess...

Cheers

Luke

revving on the hwy is the fuel comsumption killer

its cycling through the load axis on the fuel map that waste's fuel.

as soon as you open any decent amount of throttle it will drop on the load map on the stock ecu and the afr's will richen up too all hell, which is where the economy goes out the window

if you do a full tank of 100km/h driving with a steady throttle you'll get some kick ass economy, assuming the narrow band sensor and 02 feedback is working correctly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...