Jump to content
SAU Community

Recommended Posts

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I'm working on a plug now for an airbox for 33 GTR,

will post up some pics when i finished making the part,

I'm putting custom vents in the CF bonnet that duct straight to an enclosed airbox. no more hotair for me

A lot of former FSAE guys on here. Good to see. I was part of the ADFA team last year and after a change of uni im now part of Redback Racing with UNSW. Below is a pic of our body work from last year, im in charge of the bodywork/composites this year so hopefully ill learn a fair bit about that side of things.

post-24130-1144737851.jpg

I've got a quick question about working with CF. I've got some carbon doors and guards, but the top 3-4" are painted in grey. I want to get them sanded back to all CF but i'm not sure whether i trust a normal fibreglass workshop. Would the doors need to be re-gel coated or maybe just another clear coat on top? It hasn't been gel coated over the painted section (you can run your fingernail up the CF part and sort of get your nail under the painted section).

post-2742-1143701510.jpg

HI neil, im not quite sure what exactly ur asking, because as far as i know, gel coats are used on moulds to get a bit more bling on ur part, so id say its a coat of clear that ud be after. If your going to sand back to the carbon you will have to go with a coat of clear. Might be a good idea to try a little section first and see how you go. out of curiosity id love to know what the weight diff is between the composite door and the standard metal..

Yeah that's what i was trying to get at, if i sanded back the paint would it just need clear coats, not a gel coat.

I'll weigh the doors when i swap them this weekend. I already weighed the guards which were 1290g, GTR aluminium ones were 1900g (i guess gtst steel would be a kg or more heavier?). The bonnet isn't as light as the last dry CF one i had because its got a lot more ribbing.

Gents.

can suggest a Carbon Fibre item to make.......?

Vortex Generators.

1. They rock.

2. They look tops

3. Why should the Evos only get them?

4. I know 10 people who would buy them.

Its the bit on the top of the rear window

Droolz

post-6399-1144891274.jpg

post-6399-1144891315.jpg

Just wondering if uve ever seen them without that strip of paint? If i had a shmick carbon door i would not paint over it.... maybe that portion of the weave was not as crash hot? Anyway go for it, just be ware to do it very carefully once u get to the carbon. Probably a flat pneumatic sander with some 600 wet or dry to start with . once ur down to carbon go to 1200 wet/ then 2000 wet (if u want) followed by ur coat of clear.

also we made a set of doors for an s15 they weigh 6kg. original weight is 38kg i'd say thats a big saving.

and neil i'd watch rubbing back to the carbon, its easy to rub through. once you rub through the first layer it changes its look, maybe you should just paint the tops the same colour as the car leave the bottom bit carbon finish.

also we made a set of doors for an s15 they weigh 6kg. original weight is 38kg i'd say thats a big saving.

and neil i'd watch rubbing back to the carbon, its easy to rub through. once you rub through the first layer it changes its look, maybe you should just paint the tops the same colour as the car leave the bottom bit carbon finish.

Ahh yes id say thats a weight saving alright...Massive one.. Just wondering what other carbon bits u make? i Guess u guys use pre-preg with autoclave cures?

  • 3 weeks later...
I'm working on a plug now for an airbox for 33 GTR,

will post up some pics when i finished making the part,

I'm putting custom vents in the CF bonnet that duct straight to an enclosed airbox. no more hotair for me

Any updates on this airbox and bonnet setup i may be interested once you get it all done.

  • 2 weeks later...
' date='3 May 2006, 08:58 PM' post='2137509']

hey MrVspec,

what is the price for the C/f Flat boot for the r33?

The carbon flatboot is $1650, there is also a 6 week wait for the carbon at the moment. that is 3k 2x2 twill

Any updates on this airbox and bonnet setup i may be interested once you get it all done.

the airbox setup is still getting finished should be done for auto salon... will have pics soon as i finish.i'll post em up

Edited by MrVspec
We make pretty much anything... :D mostly motorsport parts.

We dont use pre-preg or auto claves... we hand lay everything, and vaccum infuse everything...

Hi MrVspec, if you don't auto clave the parts, am I correct in assuming that you don't do stressed stuff such as prop shafts?

Cheers

PS your parts look very well made... you NEED to get your website up again! :D

PPS can you do an R32gtr with Z-tune style louvres down the middle?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...