Jump to content
SAU Community

Recommended Posts

hey guys and girls,

just wondering about the different specs of the variuos GTR's around. could someone shed some light on them cos it seems everyone has a different opinion of them.

i've been told the V-Specs have brembos (and different wheels if still fitted), and the Nismo versions have no ABS, no rear wiper, ~60kg lighter, and different bodykit (nostrils, bonnet and boot lips, skirts). Are there any other differences? because i've read that R33 V Specs have more aggressive diffs and suspension?

reason i'm asking is because i'm trying to tell if it is worth the extra spend for the car as opposed to getting new brakes (and etc.) for a normal GTR?

i'm new to forums so you'll have to forgive me if i'm in the wrong section.

Cheers, see you on the road...

Link to comment
https://www.sau.com.au/forums/topic/109045-r32-gtr-vs-v-spec-vs-nismo-edition/
Share on other sites

best bet is to do a search of the forums & you should find boundless info on the subject.

reason i'm asking is because i'm trying to tell if it is worth the extra spend for the car as opposed to getting new brakes (and etc.) for a normal GTR?

Basically, no it isn't worth the extra spend to buy a V-spec GT-R or a Nismo edition unless that is what you really want for its own sake. The brake upgrade is nothing brilliant (The Nismo edition doesn't even have that) & can be easilly bettered buying aftermarket rotors/calipers. Essentially aftermarket gear that is 10 or so years further on in its development will always be a better bet than the Nissan/Nismo upgrades offered from the 1990's.

Best way to get your hands on a GT-R that goes harder than a stockie is to buy one already in Australia. The only ones coming in from Japan from now on will be basically stock as per the RAWS scheme.

Just bought a 93 Vspec

Differences:

- Brembos, solid rotors (not cross drilled)

- The diff on R32 GTR Vspec are not finned, the normal GTR is finned (opposite of R33)

- 4WD system is the same same as R33, doesn't take as long to shift touque to the front wheels

- 17" BBS rims (stock)

Suspension is the same.

Thats about it. Oh, and it has a VSPEC sticker on the back :P

post-27256-1142069595.jpgthanks gexenon, and everyone else btw, but i think i'm leaning toward a Nismo edition, or at least one with the body kit, they just look f*@#in' sweet.

is it just me or does that screen shot say they have bigger turbos???

what does everyone think about what level of mods/tune to buy?

should i get a stocker or mild modded? because they would both have had a hard life, the modded one might have had a little more money spent keeping everything in order?

i don't know, does anyone have any comments/suggestions from experiance???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...