Jump to content
SAU Community

Rb Parts, Wheels, Heaps Of Other Parts

DoughBoy
 Share

Recommended Posts

DoughBoy Veteran

DoughBoy

Posted
Posted

Wheels

Racing Hart CP-035

17x8.5+35, 15x7.5+40. Got this combination in to run large drag slicks/radials (can fit the 275/60r15 Mickey Thompson radials-28x11.5 inch- on these). $1500

Rays wheel nuts - pack of 20, includes socket - $150

Nismo extended wheel studs - pack of 10, 60mm long - $100

Suspension + Brakes

S15 Spec R front brakes/discs/hubs - near new, great for converting 4 stud to 5 on an S13 $600

Solid cradle mounts - New R33 $150

Tomei engine bay brace - Used, triangular strut brace, bolts from strut to strut to firewall $200

Turbos & exh manifolds

T67-25G turbo - Brand new, 8 or 10cm rear housing - $1800

Trust RB20/25 exh manifold - $1200, or will sell as a partial kit with the turbo, dump pipe, intercooler pipes for $3000

HKS RB20/25 exh manifold - High mount, T25 flange $1200

HKS 2JZ highmount twin manifolds - twin gates, T25 flange $900

HKS RB26 stainless low-mount manifolds - with crossover pipe - $1300

Trust alloy pipe kit - suit highmount single, from turbo to intercooler, intercooler to std RB26 intake. Has Trust type R blow off valve after intercooler, all silicon joiners and clamps - $550

HKS 2835R turbo - with internal wastegate 0.86 housing or 1.12 ext gate housing. $1200

SR20 stainless exhaust manifold and split dump pipe, new - $450

Diffs, gearboxs and drivetrain

R33 GTR complete rear cradle - diff, hubs, carriers, axles, suspension arms $750

R33 GTR + GTS-t axles - $80 each

R33 GTR alloy carriers, hubs, backing plates - $300

Assorted diffs - available, diff ratios 3.54 and 3.69

R33 GTR gearbox - good condition - $1,000

OS R3C clutch - used, alot of material left - $1200

OS pull to push conversion parts, run an R32 style clutch in your R33 - $150

Stan Contributor

Stan

Posted
Posted

Hi,

I'm chasing the metal intercooler pipe between the Twin Turbo pipe and the Intercooler on the passenger side and an R33 metal power steering resevoir.

Can you help?

Thanks

Stan

DoughBoy Veteran

DoughBoy

Posted
  • Author
Posted

Impul - the Rays nuts are black

Stan - I've got both, will PM you

Black32 - I'll have a look, will have to open a few diffs to check.

driftking - yes they fit on an S2 GTS-t

abcent Mentor

abcent

Posted
Posted

any idea if the 33GTR gearbox will bolt into a 33-t? Know someone in dire need of a gearbox. Also, any idea of cost freighting it to Geelong Vic, 3220?

if it fits and can do a good price including frieght, ring Kris on 0421579800 an we'll sort out the finer details

thanks

aridyne Enthusiast

aridyne

Posted
Posted

Is the Trust RB20/25 Exhaust Manifold a high or low mount? I have a high flowed R33 GTST turbo with a T3 Flange. Do you have a pic of the manifold?

DoughBoy Veteran

DoughBoy

Posted
  • Author
Posted

Abcent - GTR + GTS-t gearboxes are not interchangeable. Some internal parts are, but it's not a direct swap.

Mr Cash - Sorry, no RB20/25 stock replacement dump pipes. I do have a GTR replacement item, new, made out of titanium but thats $1200.

Xfixiate - I have a set of 6 std RB26 injectors, will PM you

Aridyne - The Trust manifold is highmount, and has a Mitsu 3 bolt flange

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • djr81
      RB26DETT Sketchy boost mod?

      By djr81 · Posted

      Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...