Jump to content
SAU Community

Recommended Posts

Guest Mashrock

i liked the caltex shit in my gtr.. but mostly put in bp as there usually have pumps free caus cheep c**ts are trying to save their 4c

which is what 124 bucks a year on a 60l tank a week..

but so many times accidently put in the 95.. tho this was when i had the gti-r

This has actually be covered before... The story is that BP Ultimate achieves its 98 Octane rating by refinement etc..

Other '98 Octane' fuels actually use additives to get a 98 Octane rating. This also means anything other than BP Ultimate will go off very fast because of all the additives, whereas Ultimate will last a lot longer.

For those of you that didn't know this, something to consider. I myself would NEVER put any other 98 in other than Ultimate unless I was like stranded and running on empty.

Well guys where I'm living Vortex is Caltex's Premium os it's only 96 octane and I have had dirty fuel twice from Optimax and therefore i'm running Ultimate never had any issues with it car runs perfect.

Well thats my 2 cents anyway

Many people believe that both fuels are manufactred from the same place. I dont believe this myself but both will prob contain same chemicals, addictives.

Is it worth say buying prem unleaded and puttin in a bottle of octane booster. i have heard of a few people doin this.

BP fuel is so expensive compared to the others. Is there a bp discount card or somethin.

Many people believe that both fuels are manufactred from the same place. I dont believe this myself but both will prob contain same chemicals, addictives.

My dad works for the BP refinery and yes he does say the fuel is manufactured in the same place.. maybe shell add those additives to if after or something i dont know. i still choose to use ultimate over optimax, maybe its just in my head lol.

The income in Canada... or were i live is about $64,000/ year. that is the yearly average for British Columbia.

Our minimum wage in Canada is $8.50/ hour..

But the gas that is $3+/L is our race fuel 103 the 110 is $5+/L.

I belive that the gas prices for our 94 Octane is sitting at $1.20/L right now. That is called "Super Premium" and we can only get it at 1 Gas Station. Cheveron.

I think that our dollar is Slighty stronger then the AUD. $1 Canadian is worth $1.20 AUD

Dee 33,

With all respect we know theres more to a fuel than the power figures it puts out..

And yes, BP handle all the fuels. But Ultimate is made to their own, I believe they won't sell it to any other companies, hence why everyone else uses additives to regular premium.

As Johhny said, Ultimate is Ultimate. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...