Jump to content
SAU Community

Rb26 Sump Extention?

GTR 94

By GTR 94,
in Engines & Forced Induction

 Share

Recommended Posts

maccattack Proficient

maccattack

Posted
Posted
I think he meant modified the cylinder head for increased oil return to the sump. We drill the oil return galleries and smooth the oil flow passages with the die grinder. Plus we fit an external oil return from the rear of cylinder head direct to the sump. Add this to the oil restriction (one feed restricted and one blocked off) in the top of the block and you have a good chance of the oil staying in the sump, not being trapped in the cylinder head. Or filling up your catch can.

TIP; If ordering the sump from Performance Metalcraft make sure you specify a fitting for an oil temperature sensor. Plus a fitting for the external oil return hose into the top of the LHS wing.

:P Cheers :D

Gary,

Your wealth of knowledge never ceases to amaze :P

Gav Mentor

Gav

Posted
Posted
Plus we fit an external oil return from the rear of cylinder head direct to the sump. Add this to the oil restriction (one feed restricted and one blocked off) in the top of the block and you have a good chance of the oil staying in the sump, not being trapped in the cylinder head. Or filling up your catch can.

TIP; If ordering the sump from Performance Metalcraft make sure you specify a fitting for an oil temperature sensor. Plus a fitting for the external oil return hose into the top of the LHS wing.

:yes: Cheers ;)

Hi Gary - can you post a pic (or sketch) of how you add the external oil return line?

Cheers

Gav

DICKY Enthusiast

DICKY

Posted
Posted

Good looking pan, but why not dry sump ?

I had a JUN baffle & a Trust sump extension, overkill prehaps but I did a serious launch with a 35k engine & ended up with a blown #6 big end, I spent a fortune rebuilding it , only for the same thing to happen again after the first few hard launches. I am now dry sumping, if you add up the cost of all the wet parts (ie jun pump 15 hundy, baffle 5 hundy, trust extension 5 hundy, welding 2 hundy, ) & compare this with dry sumping it's a joke (ie as new s/h 4 stage weaver pump from ebay 7 hundy new moroso drag tank from summit 7 hundy, plus the cost of all the lines, fittings, and a couple of filters about another 7 hundy, plus modifying the sump pan 7 hundy, & finally a weaver drive kit for 2 hundy) I really wonder why I did not dry sump in the first place ! I would appreciate your comments ?

GTR 94 Mentor

GTR 94

Posted
  • Author
Posted
I had a JUN baffle & a Trust sump extension, overkill prehaps but I did a serious launch with a 35k engine & ended up with a blown #6 big end, I spent a fortune rebuilding it , only for the same thing to happen again after the first few hard launches

firstly can i just ask how a dry sump works? also as the above states about the trust ext and jun baffle why did it blow the big end was it from lack of oil? also did it have an extended oil pick up, of been told this should help? im just new to this and need to know as the last thing i want is to blow this motor again......

thanks guys im glad this topic has taken off.

JAGR33 Grand Master

JAGR33

Posted
Posted
JagR33 runs a stock sump i believe with his tracked 33 GTR, 350awkw :P

There are numerous others too.

Its all about the prep work to head and other things, then you wont need a sump for your aims Lee :D

That's correct, standard sump, Ben (Racepace) assured me it would be OK, as long as oil is at the right level....

Done 3 trackdays, so far so good....

Beer Baron Grand Master

Beer Baron

Posted
Posted
firstly can i just ask how a dry sump works? also as the above states about the trust ext and jun baffle why did it blow the big end was it from lack of oil? also did it have an extended oil pick up, of been told this should help? im just new to this and need to know as the last thing i want is to blow this motor again......

thanks guys im glad this topic has taken off.

best idea it to google: "what is a dry sump" or "dry sump system" or similar then you can learn how it works.

Fitzpatrick Speed Works Mentor

Fitzpatrick Speed Works

Posted
Posted

I have done a dry sump on my rb30/26 in my gtr. Car not running yet but let me tell you (not to scare anyone off) doing a dry sump setup on a foreign motor (ie all the parts are for chevs not nissan) is farkin tuff, not easy at all. If you have the mechanical know how it will make it easier but still alot of headaches, like pulley sizing to ensure enough oil and pressure on idle etc....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Jacks that fit under GTR lips that can reach the subframe?

      By MBS206 · Posted

      You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • Piggaz
      Jacks that fit under GTR lips that can reach the subframe?

      By Piggaz · Posted

      http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • MBS206
      R32 GTST - 600KW+ RB28/CD009 Build

      By MBS206 · Posted

      Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • f00stx
      Intro/R33 owner

      By f00stx · Posted

      Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • f00stx
      Second time Skyline owner (R33 GTS-T and now a V36 370GT)

      By f00stx · Posted

      Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...