Jump to content
SAU Community

Recommended Posts

i posted this in general maintenance but didnt get a response, so i thought i'd try in here.

ive bought an n1 oil pump for my rebuild and ive been told by justjap that theyre a direct fit for rb25det. ive also heard from other sources that they arent a direct fit and need to be modified somehow, he said the actual pump needs to be modified, not the crank collar (which is what is needed for the rb30 I THINK).

whats the story with them? do they or dont they need to be modified?

Link to comment
https://www.sau.com.au/forums/topic/110104-n1-oil-pump-on-rb25det/
Share on other sites

Why not street use? Arent there heaps of GTR's that run this pump on the street?

the n1 variants are for track use only and not street use.

i think i recall reading they are in fact worse for a street car.

they are designed for high constant revving and not plodding around a street, idling etc

another classic example of how this moderator is not helping the forum! =( Isn't it best not to comment if you don't know for sure what you're talking about?? talk about fundamentals.

I too can confirm it fits directly no modifications required. What people suggest in terms of modifying your rb25 setup, is the restriction of oil to to the head, as people have commented on this forum, that not enough oil is left in the sump at the pickup. To get around this, you can install a front mount oil cooler kit to add to the amount of oil capacity. It is recommended that a larger aftermarket sump be fitted if you intend to be constantly revving (ie drifting) or track use. But if not, then it will be fine.

another classic example of how this moderator is not helping the forum! =( Isn't it best not to comment if you don't know for sure what you're talking about?? talk about fundamentals.

I too can confirm it fits directly no modifications required. What people suggest in terms of modifying your rb25 setup, is the restriction of oil to to the head, as people have commented on this forum, that not enough oil is left in the sump at the pickup. To get around this, you can install a front mount oil cooler kit to add to the amount of oil capacity. It is recommended that a larger aftermarket sump be fitted if you intend to be constantly revving (ie drifting) or track use. But if not, then it will be fine.

what are you on about?

some of the stuff in your post isnt exactly accurate either :dry:

each to thier own

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...