Jump to content
SAU Community

Garrett Gt2860r/2560r Bolt On Turbos Rb26

Tommyk
 Share

Recommended Posts

Tommyk Veteran

Tommyk

Posted
Posted

Guys

I have these turbos for sale. Only been on the car for about 5000 kms.

Made somewhere around the 300awkw at just under 1.3 bar.

Im after $2000 ono. No shaft play at all. These are like brand new.

Reason for sale? Need funds to buy a 34 gtr

Pics are below

post-8082-1142655855.jpg

post-8082-1142655915.jpg

post-8082-1142655954.jpg

Tommyk Veteran

Tommyk

Posted
  • Author
Posted

Just checked the garrett website.

These turbos are rated at 360hp by garrett EACH

Which means they are good for around the 650hp mark @ 1.6 -1.8 bar

http://www.turbobygarrett.com/turbobygarre...0R_707160_5.htm

Al Grand Master

Al

Posted
Posted
Reason for sale? Need funds to buy a 34 gtr
Need money for a house deposit. These are going back up to the top

so why are you selling them?...........................

By the way, which turbos are you selling? The Garrett Gt2860r or GT2560r, they are two different turbos

ru3-29T Enthusiast

ru3-29T

Posted
Posted

need to buy a gtr34 so i need the money haha

need to buy a house so need it for the deposit haha

big difference champ....

if you have money to waste on a r34gtr before your house and sorting that out pfff no idea.

i think you should tTHINK about things more...car and house wise??

and also your post on why you want to selll hahahaha

thought this was so funny..

maybe you want a bigger house so just try to sell them for 3grand hahaha

Tommyk Veteran

Tommyk

Posted
  • Author
Posted

Sorry guys

I actually wanted to do both ?

Call me confused, but I think I can only have one or the other.

The real reason is that I am selling my gtr, so i really dont need these. I will have larger turbos on the 34 seeing as the motor will be having certain modifications done to it :)

These modifications will also require larger than 700cc injectors. That is all im saying for the moment. I NEED money :mellow:

the turbos are these ones

http://www.turbobygarrett.com/turbobygarre...0R_707160_5.htm

  • 1 month later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...