Jump to content
SAU Community

Recommended Posts

4$k is PLENTY.. wanna waste money on brand parts fine. Want proven performance do it smart!

Exhausts = BATMBL for all the front stuff.. Get a catback on special from justjap or on the forums for like $300-500. Acid bath it or wash it out nice and proper and as long as it doesnt have any dents you'll be fine!

FMIC = Get a Calsonic made GTR. Good for about 250rwkw - probably less lag and better response than anything else for the price. Just get it cleaned up and flow tested etc if you're worried. $300-400 for the cooler.

HU = get a cheapie ebay unit. it's overseas model sure but you'll save a few hundred and it'll work just the same. Just make sure the radio frequency is tuned ok.

You have $2.5k left. Buy a whole stash of weed, coke and some whores.

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

$4,000 is a lot of money, i don't know if anyone has asked you but this is going into a R32 GTS-T right?

Just so we can get the engine right. RB20DET?!

if that is the case what i would do is get a GTR FMIC (instaled should be about $1000), there is no need to go with a SUPER FANCY FMIC if you are not going to be pushing the power, it is,IMO, a waste of money.

Get the Apex'i air filter (pod?)$150

good BOV (i have HKS SSQBOV and i like it)$150

upgrade the turbo to somthing special like a RB25 turbo ($500)

injectors 444CC Nismos are good for GTS-T's($400)

fuel pump (Walbro 255) In canada i got mine for $78.82 after tax

then upgrade the computer to a Emanage or the new Emanage Ultimate ($600)

This will bring you to $2900 so that will leave you with alittle music money!

I think that you will be pushing about 300HP to the ground with a setup like this and then you will be blowing all your fellow r32's away.

I think that this would even take a Stock GTR!

that is some food for thought!

I just realized that i did everything in Canadain dollars. so add 18% to everything and that is about the AUD conversion

$4,000 is a lot of money, i don't know if anyone has asked you but this is going into a R32 GTS-T right?

Just so we can get the engine right. RB20DET?!

if that is the case what i would do is get a GTR FMIC (instaled should be about $1000), there is no need to go with a SUPER FANCY FMIC if you are not going to be pushing the power, it is,IMO, a waste of money.

Get the Apex'i air filter (pod?)$150

good BOV (i have HKS SSQBOV and i like it)$150

upgrade the turbo to somthing special like a RB25 turbo ($500)

injectors 444CC Nismos are good for GTS-T's($400)

fuel pump (Walbro 255) In canada i got mine for $78.82 after tax

then upgrade the computer to a Emanage or the new Emanage Ultimate ($600)

This will bring you to $2900 so that will leave you with alittle music money!

I think that you will be pushing about 300HP to the ground with a setup like this and then you will be blowing all your fellow r32's away.

I think that this would even take a Stock GTR!

that is some food for thought!

I just realized that i did everything in Canadain dollars. so add 18% to everything and that is about the AUD conversion

doot....its a rb25det....a r34 :P

Nice Exhaust First With CAI and and pod with 1 of thos boxs on this forum $2-$2.5 thousand

FMIC with PBBOV $1.5 - $2 Thousand

Bleed value and Boost gauge$200 - $300

SAFC if any money left

as for music get a cd player with amp and some resonable 6x9s $1.5 thonsand all up

no need to go over board and you have an r34 and i recon you might keep it for a few years so you dont need to rush it all

James

Nice Exhaust First With CAI and and pod with 1 of thos boxs on this forum $2-$2.5 thousand

FMIC with PBBOV $1.5 - $2 Thousand

Bleed value and Boost gauge$200 - $300

SAFC if any money left

as for music get a cd player with amp and some resonable 6x9s $1.5 thonsand all up

no need to go over board and you have an r34 and i recon you might keep it for a few years so you dont need to rush it all

James

if my specialist maths is correct.....y=mx+c...carry the 1....yeh....all the above is kinda over 4k ahhaha

BOV is prob a waste of money, not really need unless you're running serious power.

Yeah, go to the suspension area, and check out SydneyKid's R34 Suspension kit. Bout $2.2K i think...

you can make your car faster without increasing the power. Full exhaust with some BATMBL parts is prob the only power upgrade i'd do with the money, the rest i'd spend on suspension, brakes, tyres, etc...

um... does the $4k have to spent on the car? maybe travel? some highly speculative shares? :yes: or just buy like $4k of ANZ shares, or something safe as houses...

id get:

apexi pod CAi and a box made up $300

batmbl front dump & cat$700 - find a 2nd hand jap brand cat back on these forums

then a Blitz or ARC front mount $1200: because the take stock piping route, i dont like the idea of drilling holes (i dont know if you can engineer them?)

thats about 2.2k

boost controller greddy profect B spec 2 $500

then a set of coil overs

and try and save a little more and get some decent tyres~ (G3's!!!)

Goodluck!

doesnt the PFC have boost controller built in? if he gets the hand controller with it, he wouldnt need an EBC. is the boost control function hard to use on th PFC? is a stand alone EBC much easier to use than a PFC. he needs a headunit to, he wants an alpine (forgot exact model) thats about $700

so far, he's only lookin at the baics, exhaust, cooler, PFC, boost. hows the fuel system hold up in 34's? wheres the limit of it, and how far will a pump upgrade go, as far as power levels with stock injectors etc. but between those mods, i guess he'd be lookin at around 220rwkw...

Edited by VB-

Come and see me, we can go for a drive in my car, I'll show you everything.

I'm in Melbourne.

I say, Suspension kit. $2.2k

Power FC with boost kit $1.3k

Full Exhaust inc BATMBL $1.0k

Hybrid Cooler Kit. $0.8k

That's a nice neat 4.3k.

Also, go to Racepace, get it tuned and make a solid 200rwkw, and the thing will handle too.

I reckon this is about the best bang for your buck combo so far, but I would change a few things:

Xforce full exhaust $950

Hybrid copy cooler kit $500

K&N pod filter + adaptor $100

2hnd rebuilt coilovers $1000

EBC $350

PFC w/ hand controller $960

Thats $3860 + tuning for the Power FC

3" front/dump + 3" high-flow cat - $270+190 (BATMBL)

3" cat back exhaust - $300 (secondhand off forum or eBay)

Hybrid copy FMIC - $200 (They're everywhere, some even cheaper)

IC piping - $200 - 300 (Have an exhaust place make it for you and use the factory piping route or just buy a full FMIC kit for $500 and cut up your car...)

POD and CAI - $200 (one of those ones with the perspex lid that Maxx was selling, or just make one yourself for about $50)

Turbotech boost controller - $40

PowerFC w/ controller - $950 (gR33ddy GB)

= $2450

say $500 for PFC tuning

= $2950

That leaves $1050 to spend on a HU or whatever. Personally I would spend it on a set of DBA slotted rotors for the front and some whiteline sway bars.

Edited by Lazy-Bastard
I reckon this is about the best bang for your buck combo so far, but I would change a few things:

3" front/dump + 3" high-flow cat - $270+190 (BATMBL)

3" cat back exhaust - $300 (secondhand off forum or eBay)

Hybrid copy FMIC - $200 (They're everywhere, some even cheaper)

IC piping - $200 - 300 (Have an exhaust place make it for you and use the factory piping route or just buy a full FMIC kit for $500 and cut up your car...)

POD and CAI - $200 (one of those ones with the perspex lid that Maxx was selling, or just make one yourself for about $50)

Turbotech boost controller - $40

PowerFC w/ controller - $950 (gR33ddy GB)

= $2450

say $500 for PFC tuning

= $2950

That leaves $1050 to spend on a HU or whatever. Personally I would spend it on a set of DBA slotted rotors for the front and some whiteline sway bars.

Game, Set and Match.....

theres your shopping list right there

proven bang for your buck items saving you alot of money also!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...