Jump to content
SAU Community

Recommended Posts

Ok peoples,

i have noticed that on hot days, when i have the air con on (even on half power) my R32 gtst auto, would sometimes be not capable of maintaining idle. the revs would drop and unless i stab the accelerator, the idle wont be restored. this will also happen when i put it into reverse with the air con (need to keep left foot on brakes and right foot feathering accerlerator!) it should be noted it doesnt happen all the time but recently has become more frequent.

what could be causing it to not mainttain idle when air con is on? is it from a worn out ignitor module? or has it got something to do with the tps and my auto comp? could worn out spark plugs cause this?

any help on this would be appreciated. thank you

Link to comment
https://www.sau.com.au/forums/topic/110515-r32-gtst-misbehaves-with-air-con-on/
Share on other sites

A couple of things to check would be the iac valve, ac on input and out put connection to the ecu (which controls the idle up).

It could also be something to do with your tps or it's adjustment.

the iac is on the back of the plenum. It can get a bit clogged up so it's usually just a matter of hitting it with some degreaser and cleaning it out.

If the car is sitting and you turn on the air con does the idle increase at all?

Mine does this too, it not sieze, its got to do with the way the mangement system controls the power on idle - after I put the wolf in it just went away but I know what you are talking about. :P

Increasing the idle revs helps too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi All,    I have my BW EFR 8474 with a T4 split 1.05 rear housing. Rear housing is ceramic coated and drilled and tapped for EMAP take off.  Supported 520awkw at 35psi through the 8HP with ~5k rpm spare on the BW 127k limit. Ran a 9.98.    Turbo is one of the first that was released but only done ~3k kms.    Asking $2800 happy to negotiate. Only selling to upgrade.   Located Gladstone QLD happy to ship. 
    • Hi is the Toshiba sceeen still available?
    • Just wondering how come the hood was grinded down? 
    • I have no hard data to report, but I have to say, having driven it to work and back all week, mostly on wet roads (and therefore mostly not able to contemplate anything too outrageous anywhere)..... it is real good. I turned the boost controller on, with duty cycle set to 10% (which may not be enough to actually increase the boost), and the start boost set to 15 psi. That should keep the gate unpressurised until at least 15 psi. And rolling at 80 in 5th, which is 2050 rpm, going to WOT sees the MAP go +ve very quickly and it has >5 psi by the time it hits 90 km/h. That's still <2.5k rpm, so I think it's actually doing really well. (I edited this from a previous version where I stated 80km/h was <2000, but that was a false memory. If I am rolling at ~1700 in 5th and floor it, it will start making boost before it goes over 2k - which is a separate "experiment" leading to the same conclusion. Which is that the boost threshold is actually quite low. It's not fast there, obviously, but it certainly makes progress towards going fast, which is not what it's been like for a long while!!) Because of all the not-quite-ideal things that have been in place since the turbo first went on, it felt laggy. It's actually not. The response appears to be as good as you could hope for with a highflow.
    • Or just put in a 1JZ, and sell me the NEO head 😎
×
×
  • Create New...