Jump to content
SAU Community

Recommended Posts

Had a look at a '96 s2 r33 today. Just wanted to clarify a few things...

the vin on the firewall was ECR33-102113

build plate engine number RB25DET 2498

build plate chassis F55R30A RC41

Model number GGKBRTFR33UDA-A-AA

then i had a look at the import approval on the strut tower

Approval number 13993

04/01

VIN 6T91MPR04T1JPL005

i cant remember what the rego sticker said, sorry.

Now am i missing something or should the import approval vin match the one on the firewall? or the model no on the build plate?

also with the blue build plate i read on the forums that it should be smooth, but the one i looked at had been stamped, or engraved, i could feel the ridges to each number. is this right?

I know that some of the imports get the km wound back and i think this did as well as the odo showed 56K km but there was a sticker on the cam cover that said its 100Kkm service was at 124Kkm on 04/01. i dont really expect a car to do less then 5Kkm a year, even a import.

and another thing that was a bit dodgy was that the radiator water was a bit murky, brown like. sort of rusty or something. this doesnt look like a good sign to me. it should be green or something. he said that the car did have a front mount on it but he took it off after a car with a tow ball reveresed into the skyline. he said that the tow ball protruded into the air gap in the front bar and damaged only the intercooler so the stock one has been placed back on it. i sort of think that it may of damaged a bit more then that???

But on the plus side, it was my first drive of a skyline and i was impressed. the car drove really well with the lowered suspension. the boost came on strong and early although the original boost gauge was not working, the bov was a little annoying. the car looked tops with 350z 18s on it. i didnt even know that they fitted straight on, bolt on? one problem was i was slowing down from a half decent speed and the brakes locked up. i didnt mean for them too (but it was good in a way)-i didnt even think i was slowing real hard, but a great big puff of smoke came from the front wheels and i didnt feel the abs. dont all s2 have abs? anyway im pretty impressed with it and will continue on my endevour to find one that feels right. at least it is a good base for other cars.

any help with the issues raised would be great

Edited by lastlineofdefence
Link to comment
https://www.sau.com.au/forums/topic/110942-r33-for-sale-question/
Share on other sites

Sounds liike it was imported pre-SEVS, the Australian VIN wasn't just ECR33XXX with a prefix before it (eg 6U90001ECR33XXX). If you are concerned you can contact DOTARS directly to find out the details of importation.

Blue build plate: engraved is fine. Read this thread for more info.

http://www.skylinesaustralia.com/forums/in...howtopic=110196

ABS optional. My S2 does not have it.

Coolant can be other colours but should be clean, indicating it's been changed regularly. Rusty sounds like hasn't been changed as often as it should.

I'd go with the timing belt sticker for kms. Either wound back or been swapped with a different dash cluster (maybe not hooked up right that's why boost gauge isn't working??)

Bottom line is that car has been wound back - probably has 160k on it if going by timing belt sticker..If you still like the car use this as bargaining tool...most of the r33s are wound back anyway.

ABS - you can see the module on the passenger side of firewall if it has it. Check if it has an airbag - I think most series2 do. If it has an aftermarket wheel this is illegal.

and back on topic.

Sorry i need the help.

private sale, sir-d

You have to run a few checks on it then with Nissan Fast software as well as get a police check and then get a mechanic to look it over... i went to a dodgy car dealer, found a car i liked, the car was a mess even after 2 RACV inspections. I refused to buy it. Went to a GOOD dealer and now have a massive smile on my face when I drive it!

why does everyone say the clocks have been wound back... they wouldnt do it to every single car... plus they sell and get a new car coz there cheap as chips

Mate they pretty much all are unless you have logs books. I have a friend who knows an importer and he asked if he wanted the k's wound back on his but he opted not to because he had all the orginal log books for it. it was not much over 100k but as someone else has stated cars with less are more attractive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...