Jump to content
SAU Community

F-con V Pro Calibration File

TomR33

By TomR33,
in Engines & Forced Induction

 Share

Recommended Posts

Guest Mashrock

Guest Mashrock

Posted
Posted (edited)

F-CON NAVIGATOR Pro is the display which is effective to the case where F-CON V Pro is used e.g., fuel amount used and addition travel distance and fuel economy etc from the injector pulse which is output with F-CON V Pro and the vehicle speed signal etc which is input, to calculate to indicate it is possible.

In addition it can use as the digital meter whose expandability is high the F-CON V Pro I /F unit adapter by using simultaneously, furthermore.

* The version upgrade of F-CON V Pro is necessary in connection with I /F unit adapter.

* Basic function

● It is possible to indicate in real time concerning the item which does input/output with F-CON V Pro.

● Monitor display can do the picture constitution of 4 types of 2, 5, 7 and 10 kind simultaneous indications. In addition, four indicatory items combines modification is possible with the respective picture constitution. (Total page 16)

● As for change of indicatory item, to do simply at, button operation one it is possible the installation of the separate sensor is necessary (depending upon the indicatory data,)

* Indicatory item

・ Rpm ・ Air flow flow ・ Instantaneous fuel economy

・ Inhalation air pressure ・ Water temperature ・ A/F

・ Inhalation warm ・ Atmospheric pressure ・ Remaining fuel quantity

・ Throttle opening ・ Power supply voltage ・ Average fuel economy

・ Vehicle speed ・ Fuel main output ・ Addition distance

・ Ignition main output ・ Fuel sub output ・ Ignition sub output

・ Knock level * A/F knock amplifier necessity

・ Hydraulic oil temperature ・ Exhaust warm exhaust warm ・ Optional oil temperature

* Connection with the I/F unit for DB meter RS is needed

In addition, with the power lighter/writer, for example inside F-CON V Pro detailed monitor value of the fuel and ignition revision (, only fuel throttle revision and only ignition knock revision and the like) it can indicate can set.

* In addition

● During monitor display, input maximum (minimum) memory/the peak hold instruction function which is made to indicate.

● During monitor display, the warning function which is warned to the driver with item/the value which is set beforehand.

* Advanced Capability

● You use the I/F unit adapter, by the fact that you connect with the I/F unit for HKS DB meter RS, you take in the information of the additional sensor, you are possible to indicate.

● The occasion where the injector injection quantity was operated, the correct remaining fuel quantity can be indicated vis-a-vis the model of part which error occurs in the genuine fuel gauge, (the remaining fuel quantitative data inputs the voltage of vehicle center gauge to F-CON V Pro and modifies to the remaining fuel data).

Modification setting of the map for fuel/ignition control change which easy is done is possible in F-CON V Pro. It was necessary until recently, the switch of F-CON V Pro itself to change with the mixed char controller of option.

* Data display inhibit function

● When you are bet data protect on inside F-CON by the power lighter/writer, the fuel/ignition output data is not indicated.

* Indicatory unit setting function

● It is possible to set the unit of the data which it indicates.

Pressure: “Pascal” “PSI” “bar/var” Speed: “Kilometer” “mile”

Temperature: “℃” “°F” Cubic measure: “L= liter” “G (US) the = United States gallon”

“G (EU) = Europe gallon”

* When illumination adjustment function (I/F unit is connected,)

● Same period doing in the illuminational signal which adjustment of brightness and contrast and the button illumination of back light of the F-CON NAVIGATOR indicatory department connects with I/F unit, it is possible to change to 2 stages.

* The logging by the power lighter/writer

● At monitoring capability each data which can be indicated at the F-CON V Pro power lighter/writer is indicatory logging possible.

The temperature sensor of meter (oil temperature water temperature other things), the exhaust gas temperature sensor and the pressure sensor (oil pressure and burning pressure) the single item it sets, to I/F unit the sensor it just is added it is possible to increase indicatory item.

F-CON V Pro I/F unit adapter

You make with F-CON V Pro and current electronic type meter I/F unit connect, data transfer you do the sensor signal which has been input with I/F unit to F-CON V Pro. Because of this, F-CON V Pro the case of setting, smaller it reaches the point where it can do setting, the monitor/the log convenient by being possible value of meter it reaches the point where you can use exhaust gas temperature revision e.g., it becomes. F-CON NAVIGATOR Pro by using simultaneously the user it is enabled as a digital meter.

* In order to make these functions effective, the program specification modification of F-CON V Pro (version upgrade) is necessary.

Edited by Mashrock
  • Replies 112
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

TomR33 Collaborator

TomR33

Posted
  • Author
Posted
done tried once more and still no good,

no light comes on on the computer.

program installed ok and all that. cant think of anything else to be doing.

but the loom is 100% ok

Is the ECU powered? It has to be powered.

The phone plug (RJ12) should have:

nothing

black

yellow

red

green

nothing

looking from cable entry side.

Tom

TomR33 Collaborator

TomR33

Posted
  • Author
Posted
so it needs to be connected to the car and on?

It needs to be powered but doesn't really need to be hooked up to the car. If you have a 12V power supply you can use that to power the ECU. I can find out which pins need to be connected if you want.

Tom

Guest Mashrock

Guest Mashrock

Posted
Posted (edited)

no good, powered up and attempted to download and no orange light comes on.

loom is correct, green light is on fcon, thinks it downloads something but its nothing at all.

definatley right port as my usb port thing tells me so.

Edited by Mashrock
TomR33 Collaborator

TomR33

Posted
  • Author
Posted
no good, powered up and attempted to download and no orange light comes on.

loom is correct, green light is on fcon, thinks it downloads something but its nothing at all.

definatley right port as my usb port thing tells me so.

What USB port thing? Are you using USB to serial converter?

If you using anything other than COM 1 you have to change the setting in F-con downloader.

Tom

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...