Jump to content
SAU Community

Recommended Posts

Hi guys,

I'm looking at an R34 GTT for sale and am close to purchase.

Here is a photo of the exhaust.

post-518-1143373867.jpgpost-518-1143374680.jpg

This is a Nizmo factory option, right? I've been on Prestiges list long enough to learn most of the factory options and am pretty sure it is. It also has that interior 'Sports / Silent' switch in the cabin under the steering wheel to the right.

My current R33 has a custom 3" from turbo to cat then a HKS 3.5" cat back + an Apexi air pod and has 160rwkw. This R34 didn't seem to go as hard (it just has this exhaust, no pod or other power mods), but maybe cause it was newer and smoother? Dunno. Thought it was strange though cause the R34 supposed to have a few extra KW's over an R33. Anyway, my questions:

- Can anyone tell what size this exhaust is? 2.5"? 3"?

- Does anyone know anything more about this spec of exhaust?

- The dump/front pipe is still the standard (restrictive one) right?

- Is it worth replacing with a 3 or 3.5" exhaust?

- Is there a big power difference between 'silent' and 'sports'?

- Dummy question here - will an R33 cat back system fit an R34?

Edited by McCracken
Link to comment
https://www.sau.com.au/forums/topic/111174-r34-gtt-exhaust-questions/
Share on other sites

Yeah, the silent/sports thing is a butterfly flap in the read muffler.

It's really only for sound and that's it.

Also, it tends to seize all the time because of the heat of the exhaust.

You will most likely replace it with a 3" turbo back anyway.

Then you can use the button for NAWS!

I'll have to measure it.

I guess what I'm trying to figure out is am I getting bang for my buck spending the $850 - $1,100 on replacing this exhaust with a new cat back system.

There is no doubt I'll be getting a front/dump pipe regardless.

I mean, if this is 3" but it's not 'as optimal as it could be', surely spending a grand on the car for just a small improvement isn't worth it.

If it's only 2.5" then that's another story I guess. I posted some pics in the original post, were these deleted by mods? I shrunk them and everything!

I'll have to measure it.

I guess what I'm trying to figure out is am I getting bang for my buck spending the $850 - $1,100 on replacing this exhaust with a new cat back system.

There is no doubt I'll be getting a front/dump pipe regardless.

I mean, if this is 3" but it's not 'as optimal as it could be', surely spending a grand on the car for just a small improvement isn't worth it.

If it's only 2.5" then that's another story I guess. I posted some pics in the original post, were these deleted by mods? I shrunk them and everything!

It is only 2.5" so get a full 3" system on there and forget what's there now.

my r34 im buying has this exhaust, im going to keep the flap, but upgrade to aftermarket 3.5" within 1st 3 weeks of owning the car hopefully.

but this 34 nizmo exhaust is alot better than the standard gtt exhaust :)

Edited by illusiVe
my r34 im buying has this exhaust, im going to keep the flap, but upgrade to aftermarket 3.5" within 1st 3 weeks of owning the car hopefully.

but this 34 nizmo exhaust is alot better than the standard gtt exhaust :D

Good to know its much better - I would have thought so. I added several kw just by doing a rear muffler change on a 200sx once.

Does anyone know if it's possible to weld a custom 3" exhaust up to this Nizmo rear muffler? Or won't this work as this muffler has a 2.5" inlet? It looks like its a great muffler and I don't want to have to throw it away, that's all.

its the whole thing of having the quiet/loud option.. thats the only reason why i wouldnt want to get rid of it.

i plan on making the flap compatible with my new 3.5" exhaust.

also if u get xforce, i think it doesnt come with a dump pipe, only front pipe etc..

could be wrong :D.. if im right, atleast u could make preperations to spend on dump pipe.

I had the same problem.

Got rid of the muffler and upgraded exhaust to 3" one since the muffler is only 2.5". Great power improvement but was a bit loud for me,

So I put on the old muffler with my 3" system, shame though, I need a bit of 2.5" piping to connect it to the 3" resonator and the rest of the piping.

Found it to be very restrictive! that nismo muffler is very restrictive, even though its Nismo, I see it more as a factory upgrade rather than a performance aftermarket part.

Save your money for a proper muffler and system (3 or 3.5") and keep this nismo muffler on the side just in case you need to go back to stock for whatever reason (defects).

Thats what I am doing, trying to get a proper 3" muffler now because with the big exhaust, the full exhaust was getting me about 11psi boost. With ONLY the nismo muffler put back on (i left the 3" dump pipes etc etc), boost decreased to about 8or 9 psi. So I see this exhaust as a major restriction.

If you want the quiet loud option, get an ECV.

With this muffler, quiet is quiet, loud is quiet, you cant really tell the difference.

Thanks mate, this is exactly the information I was after. Looks like that whole system is about to become a garage decoration if I get that car.

Guess I’ll just have to budget in about $1800 for a good full system when I’m comparing other vehilces. That damn exhaust sure does add up when you add dump + front + cat + cat back + fitting. Doh.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...